john stinson
Registered
last one is 00077 03254
Help me identify scuba pro first stage
- Thread starter john stinson
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
last one is 00077 03254
fmerkel
Contributor
MK20
Your vents on the yoke show that the required recall replacement of the yoke bolt has NOT been performed.
See here: Scubapro® Recalls MK 20 Scuba Regulators for Service
See here: Scubapro® Recalls MK 20 Scuba Regulators for Service
OP
john stinson
Registered
thank you!!!!
I just noticed: I should have said DIN bolt. Make sure you can remove that yoke adaptor off the DIN fitting. Sometimes they get frozen if left in place for a long time.
OP
john stinson
Registered
screws off easy
halocline
Contributor
My favorite kind....
@john stinson , I just found an upgraded DIN bolt (new in package) in my shop parts. Would be happy to service your reg or sell you the bolt, if you're having any trouble at your end.
halocline
Contributor
I'm looking for SP DIN fittings if you have a couple; I don't care whether they're the older kind with the metal knob or the newer ones.
ams511
Contributor
If you don't need them in a hurry, you can check Amazon from time to time or set up an alert. In the past, I have purchased them for under $30 each from Dolphin and Online Scuba. What I want is a source for Apeks din fittings at a reasonable price.
Similar threads
