Help me ID this canister light...

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

gulfwiskey

Registered
Messages
55
Reaction score
10
Location
Clearwater, FL
# of dives
500 - 999
Recently acquired this canister light, attempted to charge the battery and test/use the light, but nothing, nada. It is obviously a Halcyon product but I have no idea which model or type of light this is and what it's intended use(s) might be. Biggest question for me is is it worth sending in to have repaired. Not sure if it's the battery, the bulb or the charger? And not sure if it would be wiser to just replace the entire assembly as I have no idea what the current replacement cost for something similar might be.

Any opinions/help would be greatly appreciated.
 

Attachments

  • 20180624_180359.jpg
    20180624_180359.jpg
    56.6 KB · Views: 122
  • 20180624_180408.jpg
    20180624_180408.jpg
    46.1 KB · Views: 125
  • 20180624_180421.jpg
    20180624_180421.jpg
    39.8 KB · Views: 115
  • 20180624_180446.jpg
    20180624_180446.jpg
    43.3 KB · Views: 113
  • 20180624_180459.jpg
    20180624_180459.jpg
    29.8 KB · Views: 113
  • 20180624_180519.jpg
    20180624_180519.jpg
    50.7 KB · Views: 111
  • 20180624_180540.jpg
    20180624_180540.jpg
    49.9 KB · Views: 117
that is an ANCIENT canister light
Look like a 10w HID, but has SLA batteries.

If you don't have a voltmeter, then you can't really tell if it's the battery/ballast/bulb, but to be completely honest, it's not worth trying to repair. The burn time and brightness on it are comparable to the popular backup lights on the market.
You can contact some of the companies and talk about getting it upgraded with a new head, new battery, etc. but by the time you get that done you may as well buy a new one.
You can DIY a lot of stuff though if you're committed to it. Batteryspace for a new lithium battery pack, likely new bulb *cheap online since they're stock bulbs*, etc. if you're committed to getting it to work, but at the end of the day, it'll still be 600-800 lumen and you'll have a lot invested in it

sorry....
 
that is an ANCIENT canister light
Look like a 10w HID, but has SLA batteries.

If you don't have a voltmeter, then you can't really tell if it's the battery/ballast/bulb, but to be completely honest, it's not worth trying to repair. The burn time and brightness on it are comparable to the popular backup lights on the market.
You can contact some of the companies and talk about getting it upgraded with a new head, new battery, etc. but by the time you get that done you may as well buy a new one.
You can DIY a lot of stuff though if you're committed to it. Batteryspace for a new lithium battery pack, likely new bulb *cheap online since they're stock bulbs*, etc. if you're committed to getting it to work, but at the end of the day, it'll still be 600-800 lumen and you'll have a lot invested in it

sorry....

Just curious, what would one of these popular backup lights you mention cost me?
 
I like that one!

What suggestions might you have if I need more than the listed 90 burn time?

depends on what you need it for. If it's on the same dive, get a pair of them and swap them over. If it's for multiple dives in a day, then get some spare batteries for $10 and call it a day.
 
Just buy a Bryinte light and then a high quality battery. It will be cheaper and perform better. They are all Chinese Taiwanese made.
Is the brand/quality of the battery significant with regard go output and/or burn time?
 

Back
Top Bottom