Have Aqualung BC will other brand of hose fit?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

ChrisA

Contributor
Messages
1,301
Reaction score
2
Location
Redondo Beach, California
# of dives
200 - 499
The corrugated hose on my Aqua Lung BC is ripped about 1/4 way through. Got 220 dives on that BC. The last two dives (last Sunday and Weds.) I thought I was riding low in the water at the surface and had to keep adding air during the surface swim. Turn out to be a hole in the hose. OK no big deal the BC has a lifetime warranty.

But if I can find a better quality corrugated hose and power inflator assembly I'll buy it and keep the replacement the AL gives my as a backup. But if only an AL part will fit i'll buy a second AL hose for a spare

I tried a mares but the threads are a different pitch, very close match otherwise.
 
Aqualung BC's have a proprietary size hose. I deal with those hoses all the time...get the aqualung replacement.save some trouble..The hose is not underwarranty. The stitching and the bladder seal is the lifetime part. The corrugated hose won't cost much. Good Luck Hal
 

Back
Top Bottom