Gear find opinions/tips/identification

[KingsSoldier08]

My wife just got all this gear for $140 total. Cmh opinions on the gear? I know it was a steal, but it is all older gear. What I know:
SP d400 2nd stage
SP g250 (is this the hp model?) 2nd stage
SP g200b 2nd stage
SP mk20 1st stage. (I believe it had a leak)
SP mk15 1st stage
Orca phoenix dive computer (unsure if it works the back plate comes off easily (exposing a gel substance and the internals) with no obvious way to secure it. I have no air tank ATM, so unsure if it powers on.
Sherwood awac-1 dive computer (display works, haven't put it in the water yet)
Sea quest balance BCD
Malibu rds BCD.

The rest of this I have no idea what it is. Some of the 1st stages my wife said were leaking, but I was not present and will have to rent a tank to check them. I don't really know how to id a regulator without a model number or something on it. Thanks in advance

 

[KingsSoldier08]

 

[KingsSoldier08]

 

[Open Ocean Diver]

Everything including the BC’s for $140?

 

[KingsSoldier08]

Everything including the BC’s for $140?

Yeah. It was old donated stuff that nobody knew anything about. My wife decided to take it off their hands

 

[Open Ocean Diver]

Yeah. It was old donated stuff that nobody knew anything about. My wife decided to take it off their hands

Great deal… just one of those regulators is worth $140.

 

[James79]

The Scubapro 1st that just says scubapro on the knob, appears to me to be a Mk10 din, with a yoke adapter screwed on.
The US Diviers Micra Adjustable is on a matching first stage (which is internally the same as a Conshelf).

Looks like a good find!

 

[lowwall]

Nice haul. The knife is a Wenoka Blackie Collins Model 8547. Worth $40-$50 if you have the sheath.

 

[Lostdiver71]

It's a good find, all of the regulators can be serviced except for the MK15, unless you find someone that still has a service kit available. The computers are also junk, but everything else looks great and any one of the other regulators is worth what you paid for everything. Just inflate the BCD's fully and leave them overnight to make sure they don't leak and also check where the inflator attaches to the BCD at the shoulder, that is the most common failure point.

 

[runsongas]

the mk10 din is missing the spec boot which you will want for lake michigan diving. g250 is unfortunately the hp version most likely unless if the PO did some internal aftermarket upgrading.