G9 and Ikelite 125 TTL Help!

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Mel Moncrieff

Mel Moncrieff

Contributor
Messages
121
Reaction score
16
Location
Southern California
# of dives
1000 - 2499
Hi Everyone:

I just got the Canon G9 and Ike housing and twin Ike 125 strobes. I started out with one strobe and it worked well in TTL but with 2 every shot is so underexposed that it's almost as if there's no strobe. When I go to manual it works fine. How do you have to arrange your settings for TTL to work? I'm on location and missing a lot of great shots!

Thanks,

Mel
 
I contacted Ikelite and they said that the little circuit box that houses the TTL conversion electronics get pinched too tight, and that I should loosen the screws on the box. I couldn't do that until I got home, and it seems to work pretty well now, although it did cut out again once. This certainly doesn't leave one with confidence in one's equipment.
 
You must log in or register to reply here.

Back
Top Bottom