Fixed failed UK AquaSun battery

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

austinspace

Contributor
Messages
167
Reaction score
7
Location
Austin, TX
# of dives
200 - 499
Posting this fix in case it might be helpful to someone else...

I had suspected the battery on my UK AquaSun needed replacing. After charging overnight it just flashed the light on ever so briefly. So I cut the black wrapper off the battery pack to see if I might be able to rebuild it myself, rather than spending $65 on a replacement battery. After pulling the plastic cap off the top (it had been hot-glued to the battery cells), could see some obvious corrosion on one of the terminals. Rubbed clean with some fine steel wool -- made a few sparks when making contact with the battery beside it. Stuck it back together and it works just fine. Will apply some new hot glue for the top and bottom caps and then wrap it all in duck tape (never use that stuff on ducts!).
 

Back
Top Bottom