Factors affecting your batteries’ charge time

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

XTAR

Contributor
Messages
408
Reaction score
125
Location
China
# of dives
I'm a Fish!
The time it takes to fully charge your dive lights’ batteries depends on several main factors. And these factors include as below.

*The battery capacity: With all other factors constant, a 18650 battery with a higher capacity, will take longer time to charge compared to one with lower capacity. For example, a 1800mh battery can take about 1 to 1.5 hours to charge whereas a 3500mah battery may take about 3 to 4 hours to be fully charged using the same adapter.

*The power output of the charger: Comparing with a fast charger with 10W (2A, 5V) output power, using the common 5W adapters will charge the same batteries in almost twice the time.

*Battery temperature: High battery temperature may slow down charging or reduce lifetime of the battery.

*Battery internal resistance: The lower the internal resistance, the faster for the battery to charge. For example, the batteries tend to lose capacity as they age, also the internal resistance increasing, then it may need more time for charging.

*Some other factors: For example, if the charging cable is too thin or too long, there exits high internal resistance loss in the charging cable, and the current through charging cable is not enough. Then, the charger can't reach the acceptable max charging current. Besides, if there are dirty particles, rust or serious friction on the adapter or USB port, which leads to big internal resistance. It may also cause low current charging, which leads to longer charging time...
 
Current state of charge has a bit to do with it, too. 😛
 
https://www.shearwater.com/products/swift/

Back
Top Bottom