Does the Viper (not Viper Novo) show seconds in "qauge mode" ?
- Thread starter divad
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
i have a suunto vyper 2 ... i am copying from the manual... i have not used gauge mode.
"""diving in gauge mode..
if set to gauge mode the dive computer can be used as a bottom timer..
in gauge mode the total dive time is always displayed in minutes in the lower right corner..
in addition, a dive timer in the center window dispalys time in minutes and seconds..
the center window dive timer is activated at the start of the dive and it can be reset during the dive and used as a stop watch by pressing the select button..
the dive timer is reset and the previously timed interval (min / sec) is displayed below..""""
hope this helps
"""diving in gauge mode..
if set to gauge mode the dive computer can be used as a bottom timer..
in gauge mode the total dive time is always displayed in minutes in the lower right corner..
in addition, a dive timer in the center window dispalys time in minutes and seconds..
the center window dive timer is activated at the start of the dive and it can be reset during the dive and used as a stop watch by pressing the select button..
the dive timer is reset and the previously timed interval (min / sec) is displayed below..""""
hope this helps
Similar threads
