DNAx membrane system

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

SparticleBrane

Contributor
Messages
5,030
Reaction score
21
Location
NC
Didn't know where else to put this so I figured I'd put it here since it has to do with tank filling.
Does anyone happen to know the ballpark price for a DNAx nitrox membrane system? No compressor, no banks--just the membrane system. My school only does air fills right now and I am just curious to see how much it would cost to strap on one of these to make nitrox on the fly.

Thanks!
 
Call Dive Outpost in Luraville. They have one.
 
Hmm...well, I was hoping for more of a direct answer. :wink:
Are we talking $500? $1,000? $5,000?
 
No.... As I recall, the membrane system isn't pricey compared to the hyperfilter appliance. I am not sure if I keep the website for the membrane though... I will dig out more info...
 
Thanks for any information you can provide.
The air quality is already quite high--to my knowledge it's already hyperfiltrated. Thus we'd probably only need the membrane system.
 
Give these folks a call, we use their system onboard a ship I work on and it's been trouble free for a couple of years.

http://www.dnax.com/

You also need a low pressure compressor.
 
I think one important thing with membrane systems is to make sure you have a 4 stage compressor. Less than that you might have some issues.

Brent
 
https://www.shearwater.com/products/swift/

Back
Top Bottom