diffuser and cover

[Scubamedicjoe]

can I remove the four little screws on the PT0o15 housing so the diffuser wont block the flash on the camera till i get a strobe to use the flash !!!!!!!!!!!
I am thinking thats what I have to do to use camera's flash / with the oly housing

 

[Dee]

It's not necessary to remove the diffuser panel in order to get good photos with the internal flash. In fact, they'll be better WITH the panel in place because the diffuser ...uh, diffuses the light, spreading it over a wider coverage area. And the flash is plenty strong enough. In fact, I usually have to lower the strength of the flash.

But if you want to see for yourself, go ahead. It won't hurt anything unless you lose those little screws!