DeepTools planner
- Thread starter CptMat
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Could be a unit conversion issue if using imperial internally. Try setting the switch depth in the gas page to 6.1 m or 7 m.
DeepTools can be a bit finicky with rounding or unit conversion under the hood, especially if it's toggling between metric and imperial. Try setting your O2 switch depth a little deeper than 6m (like 6.1 or even 7m) in the gas settings. That usually clears up the auto-switch behavior in BO mode.
Also, double-check if you’ve got any default settings or auto-profile options that might override your manual entries, sometimes the planner applies a conservative override if it thinks you're ascending faster than expected.
Also, double-check if you’ve got any default settings or auto-profile options that might override your manual entries, sometimes the planner applies a conservative override if it thinks you're ascending faster than expected.
Similar threads
