datatrak dos

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

jtrain01

Contributor
Messages
117
Reaction score
0
Location
Derry, nh
# of dives
100 - 199
Does anyone have the datatrak dos program? I am trying to make a connector and need the dos program. If there is anyone willing to email it to me, it will be greatly appreciated.
 
Jtrain,,,
I have it. I'll send it to you tonight when I get home.
I assume you're building the interface. What are you using for the pins? I used pieces of soldered wire and their not holding up so well....

Mad_diver
 
I found a site on how to make them and the guy said that he just used an unfolded paperclip and said that it worked fine. I assume that you already made one and it works. Do you have the plans for that still. I have some plans but I want to see if there are any differences. Also what kind of wire did you use for the whole thing?
 
I'm sorry it's taken me so long to get back to you...

Yes, I still have the plans... in fact there are two versions... One is rather inexpensive that will only "read" the Uwatec computer (cannot send programming adjustments to the dive computer)... the 2nd one will allow you to change settings on the computer but is a lot more involved and more expensive to build.

it sounds to me like the site you found might be the same one I used, so the plans are probably the same.....


jtrain01:
I found a site on how to make them and the guy said that he just used an unfolded paperclip and said that it worked fine. I assume that you already made one and it works. Do you have the plans for that still. I have some plans but I want to see if there are any differences. Also what kind of wire did you use for the whole thing?
 
Mad_diver:
What are you using for the pins?

Use thumbtacks - the metal, flat headed kind. A little scuffing from a Dremel or sandpaper, and a large enough soldering iron and they take solder quite well.
 
Mad Diver, could you send me the link to the downloader plans? We moved to Saipan and somehow can't find my wife's memo mouse downloader. I guess I should also ask if it will work for her Z-Nitrox.

Thanks,
Dennis
 
I like wlog but is it worth spending the money to unlock it? Do you get anything extra for features once you unlock it?
 
I was using unregister wlog for 3 mounts and the say's "utilization period run". After that I was unabled to transfer from Aladin to wlog...
Then I sent thomas money and I got reg. file to unlock it. And now it's working 100%.
And you get free update for all future version's.
 

Back
Top Bottom