allen230
New
This watch comes with all original packing and documentation. Perfect condition has stainless steel band and black rubber band. $360/obo Allen 310-929-0049
JV0020-04E Citizen Eco-Drive Aqualand Promaster Diving Watch
Very dark grey / black dial, and small square digital display window
EL light, luminous hands, markers and numbers for easy viewing in low-light conditions
Stainless steel case and screw case-back, black rubber strap
Big solid watch measuring 48mm at its widest point
This watch is a combination divers watch equipped with a built-in water depth gauge. It is equipped with a water sensor that automatically switches the watch to the diving mode when water is detected. This watch is also a solar-powered watch provided with a photoelectric power generation (Eco-Drive) function.
The following parameters are displayed during diving:
- Current depth, current time, current water temperature, dive time and maximum depth are displayed on digital display
- Elapsed dive time is indicated with the minute hand
- Maximum depth is indicated with the function hand
The following can be performed after diving:
- Log data recorded during diving (including log number, dive date, maximum depth, minimum water temperature and dive time) can be recalled.
SPECIFICATIONS
Water resistant 200m (20 bar)
Watch Operating temperature range: 0°C to 55°C (32°F to 131°F)
Timekeeping Accuracy: ±15 seconds per month on average (when wearing at normal temperatures of 5°C to 35°C (41°F to 95°F)
Depth Measurement Accuracy:
- 0m to 100m: Within ±(1% of displayed value + 0.3 m) (when used at a constant temperature)
- 0 ft to 300 ft: Within ±(1% of displayed value + 1 ft) (when used at a constant temperature)
- Guaranteed accuracy temperature range: 0°C to 40°C (water depth range: 0m to 100m) 32°F to 104°F (water depth range: 0 ft to 300 ft)
* The accuracy of water depth measurement is affected by changes in ambient temperature
- Working altitude range: 300m to 3000m / 1000 ft to 10000 ft (above sea level)
Water Depth Measurement Range
1m to 100m / 0ft to 300ft
Water Temperature Measurement Accuracy
Displayed value ±2°C / ±4°F
Water Temperature Measurement Range
-9.9°C to 40°C / 14°F to 104°F
Modes and Display Functions:
Standard Mode
- Time
Analog: Hour hand, minute hand, second hand, function hand (charge level / depth measurement)
Digital: City name, month, date, day, year (during correction only), daylight savings time
- Surface time measurement (measurement and display of time on surface following completion of a valid dive)
Hours, minutes (up to 24 hours), previous dive time, previous maximum depth
- Travel time
Analog: Time in the time/date mode
Digital: City name, hours, minutes, month, date, daylight savings time
- Alarm 1 / Alarm 2 / Alarm 3
Analog: Alarm time (hours, minutes)
Digital: City name, hours, minutes, on/off setting, daylight savings time
Alarm monitor
- Diving mode
Dive alarm setting
Depth alarm (dive alarm tone sounds, LED lights)
Setting range: 5m to 99m / 5ft to 295ft
Setting units: 1m / 5ft
On/off switching
- Diving log recall
No. of diving logs capable of being recalled: most recent 20 logs
Log contents: Log number (01-99, 00) dive date, time zone, daylight savings time, dive starting time, maximum depth, minimum water temperature, dive time
Water sensor
Pressure sensor
Alarm functions
- Digital display error
- Water sensor error
- Pressure sensor error
- Measurement error (0m / 0ft detection)
- Diving log memory error
- Abnormal depth alarm
- Depth measurement out of range error
- Ascent rate alarm
- Abnormal depth display
- Dive time alarm
Additional functions
- Charge level indicator function
- Insufficient charge warning function
- Power save 1
- Power save 2
- Overcharge prevention function
- EL Light
Continuous operating times:
- Approx 6 months (without Power Save) to 2.5 years (with Power Save 2 activated) from fully charged to stopped without recharging
- Approx 2 days from 2-second interval movement to stopped
Approx measurements
Case diameter: 48mm
Weight: 140g
JV0020-04E Citizen Eco-Drive Aqualand Promaster Diving Watch
Very dark grey / black dial, and small square digital display window
EL light, luminous hands, markers and numbers for easy viewing in low-light conditions
Stainless steel case and screw case-back, black rubber strap
Big solid watch measuring 48mm at its widest point
This watch is a combination divers watch equipped with a built-in water depth gauge. It is equipped with a water sensor that automatically switches the watch to the diving mode when water is detected. This watch is also a solar-powered watch provided with a photoelectric power generation (Eco-Drive) function.
The following parameters are displayed during diving:
- Current depth, current time, current water temperature, dive time and maximum depth are displayed on digital display
- Elapsed dive time is indicated with the minute hand
- Maximum depth is indicated with the function hand
The following can be performed after diving:
- Log data recorded during diving (including log number, dive date, maximum depth, minimum water temperature and dive time) can be recalled.
SPECIFICATIONS
Water resistant 200m (20 bar)
Watch Operating temperature range: 0°C to 55°C (32°F to 131°F)
Timekeeping Accuracy: ±15 seconds per month on average (when wearing at normal temperatures of 5°C to 35°C (41°F to 95°F)
Depth Measurement Accuracy:
- 0m to 100m: Within ±(1% of displayed value + 0.3 m) (when used at a constant temperature)
- 0 ft to 300 ft: Within ±(1% of displayed value + 1 ft) (when used at a constant temperature)
- Guaranteed accuracy temperature range: 0°C to 40°C (water depth range: 0m to 100m) 32°F to 104°F (water depth range: 0 ft to 300 ft)
* The accuracy of water depth measurement is affected by changes in ambient temperature
- Working altitude range: 300m to 3000m / 1000 ft to 10000 ft (above sea level)
Water Depth Measurement Range
1m to 100m / 0ft to 300ft
Water Temperature Measurement Accuracy
Displayed value ±2°C / ±4°F
Water Temperature Measurement Range
-9.9°C to 40°C / 14°F to 104°F
Modes and Display Functions:
Standard Mode
- Time
Analog: Hour hand, minute hand, second hand, function hand (charge level / depth measurement)
Digital: City name, month, date, day, year (during correction only), daylight savings time
- Surface time measurement (measurement and display of time on surface following completion of a valid dive)
Hours, minutes (up to 24 hours), previous dive time, previous maximum depth
- Travel time
Analog: Time in the time/date mode
Digital: City name, hours, minutes, month, date, daylight savings time
- Alarm 1 / Alarm 2 / Alarm 3
Analog: Alarm time (hours, minutes)
Digital: City name, hours, minutes, on/off setting, daylight savings time
Alarm monitor
- Diving mode
Dive alarm setting
Depth alarm (dive alarm tone sounds, LED lights)
Setting range: 5m to 99m / 5ft to 295ft
Setting units: 1m / 5ft
On/off switching
- Diving log recall
No. of diving logs capable of being recalled: most recent 20 logs
Log contents: Log number (01-99, 00) dive date, time zone, daylight savings time, dive starting time, maximum depth, minimum water temperature, dive time
Water sensor
Pressure sensor
Alarm functions
- Digital display error
- Water sensor error
- Pressure sensor error
- Measurement error (0m / 0ft detection)
- Diving log memory error
- Abnormal depth alarm
- Depth measurement out of range error
- Ascent rate alarm
- Abnormal depth display
- Dive time alarm
Additional functions
- Charge level indicator function
- Insufficient charge warning function
- Power save 1
- Power save 2
- Overcharge prevention function
- EL Light
Continuous operating times:
- Approx 6 months (without Power Save) to 2.5 years (with Power Save 2 activated) from fully charged to stopped without recharging
- Approx 2 days from 2-second interval movement to stopped
Approx measurements
Case diameter: 48mm
Weight: 140g