Changing end of fibre optic cable

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

noserider

Contributor
Messages
642
Reaction score
558
Location
Uk
# of dives
500 - 999
IMG_1886.jpg

I have picked up a cheap second hand D2000 that I want to fix to PT059 case, the connector on the cable is not compatible with the PT059, is it just a case of snipping the cable and then adding the cable to an Inon Rubber Bush Type L and use the adapters that came or with the PT-059 or should I buy a complete new cable?

*update - the cable pulled out, so I think I can just push it into the Inon Cable, well I hope I can

It sounds like a really basic question but if you don't know the answer it is not basic :)

Inon Rubber Bush Type L
 
You can treat it as a copper wire: cut the tip off, if you need, clean off the insulation from the very end, etc.
 
Cheers everyone, all set up and working now. Just need to wait 25 days for a trip to the Caribbean
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom