Leicamshooter
Registered
- Messages
- 35
- Reaction score
- 0
Can the SPEC (silicone) system be installed on all Scubapro MK10"s. Can all MK10's be upgraded to the MK10 Plus. Thanks for your help!
Can SPEC system be installed on all Scubapro MK10's
- Thread starter Leicamshooter
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
SPEC - Yes. The older ones had small holes in the ambient chamber to retain the silicone. The later ones added a rubber boot, but it is not needed to use the spec system. In fact if you have an older one, finding a boot for it could be hard as most were discarded when SP moved away from the spec system.
Mk 10 Plus - yes all Mk 10's can be upgraded to Mk 10 plus status. The converison involves installing a new spring and a new seat retainer as well as a Mk 10 annual service kit. The new seat retainer will have a shot blasted finish and becomes the externally distinguishing feature of a Mk 10 Plus. I don't think the Mk 10 Plus labels for the yoke knob are still available, but the knobs are and are in my opinion an improvement over the older yoke screw.
Mk 10 Plus - yes all Mk 10's can be upgraded to Mk 10 plus status. The converison involves installing a new spring and a new seat retainer as well as a Mk 10 annual service kit. The new seat retainer will have a shot blasted finish and becomes the externally distinguishing feature of a Mk 10 Plus. I don't think the Mk 10 Plus labels for the yoke knob are still available, but the knobs are and are in my opinion an improvement over the older yoke screw.
Similar threads
