I am thinning my gear as I reduce my teaching load. I have a lot of extra gear and I am getting more into cycling. As a result I am going to keep only what I need for myself and since most of my diving 90% is sidemount, I don't need these.
1st set up is a Manta steel plate with a HOG 32lb bungee wing. One piece harness with HOG large weight pockets (max 10lbs each) on the waist strap and Pro Blue 5lbs pockets on the stainless buckle cam bands. This was set up for my Lake Erie single tank drysuit and similar cold water dives. Harness still has plenty of length and life in it. Deep Six crotch strap included.
Price is $375 plus shipping for the entire rig.
Separate prices would be 110 for the plate, 269 for the wing, 55 harness, 35 large weight pockets, 20 for small ones, 50ish for cam bands = 530 or so, Shipping in the US will be around 20 bucks UPS ground. You'll save 150 bucks roughly
Next is a Freedom Contour Steel plate (number 308) with HOG 32lb bungee wing. Crotch strap only ( I can sub a black one if you don't want red). I used the harness I had on it for a rescue class and straps were cut. I will include all the harness hardware- d-rings, triglides, buckle. Two cambands also included. Prices separate are 235 for the contour plate, 269 for wing, 12 for crotch strap, 15 for hardware, 25ish for both cam bands total 550 or so.
Asking 375 plus shipping which is a good deal because the freedom plates (aka Rolex of backplates) are not easy to come by. All you will need to build it is 15-20 bucks worth of webbing.
These have only been used in freshwater and the wings are in excellent condition. I do not want to part the first one out. I will consider selling the freedom plate and wing as separate items.
This is one of the earlier contours that Erik made, and while it is hard to part with, I'm not using it and it should be dived by someone. Separate I'll take 210 for the plate and 180 for the wing.
1st set up is a Manta steel plate with a HOG 32lb bungee wing. One piece harness with HOG large weight pockets (max 10lbs each) on the waist strap and Pro Blue 5lbs pockets on the stainless buckle cam bands. This was set up for my Lake Erie single tank drysuit and similar cold water dives. Harness still has plenty of length and life in it. Deep Six crotch strap included.
Price is $375 plus shipping for the entire rig.
Separate prices would be 110 for the plate, 269 for the wing, 55 harness, 35 large weight pockets, 20 for small ones, 50ish for cam bands = 530 or so, Shipping in the US will be around 20 bucks UPS ground. You'll save 150 bucks roughly
Next is a Freedom Contour Steel plate (number 308) with HOG 32lb bungee wing. Crotch strap only ( I can sub a black one if you don't want red). I used the harness I had on it for a rescue class and straps were cut. I will include all the harness hardware- d-rings, triglides, buckle. Two cambands also included. Prices separate are 235 for the contour plate, 269 for wing, 12 for crotch strap, 15 for hardware, 25ish for both cam bands total 550 or so.
Asking 375 plus shipping which is a good deal because the freedom plates (aka Rolex of backplates) are not easy to come by. All you will need to build it is 15-20 bucks worth of webbing.
These have only been used in freshwater and the wings are in excellent condition. I do not want to part the first one out. I will consider selling the freedom plate and wing as separate items.
This is one of the earlier contours that Erik made, and while it is hard to part with, I'm not using it and it should be dived by someone. Separate I'll take 210 for the plate and 180 for the wing.
Mrs. has been jonesing for once ever since I got mine. I’ll be shocked if it’s a small, but gotta keep hopes alive till they’re dashed on the rocks shortly. 
