Atomic SS1 and Zeagle BX Power Inflator

[claymore]

I have a question on the corrugated hose connections on the Atomic SS1 and Zeagle BX Power Inflator. I have an Atomic SS1 that has the threaded hose connection to the corrugated hose. My question is will the female Zeagle BX inflator connection fit the male SS1 connection or are they not the same except that both female connectors fit a garden hose?

I am aware that they use different quick disconnects on the LP inflator hose.

I am interested because there are times when I would like to use one or the other depending on which set of regs I'm using or where I'm diving and not have to clip off the wire ties remove the SS1 adapter and install an inflator or vice versa.

Thanks for any information.

 

[Pickled]

The threads match up fine. I have interchanged them and inflated the bladder. After a couple of days it does not appear that there has been any leaking. So it appears that that they are interchangeable but I would be inclined to try them out in a pool before an open water dive.

 

[claymore]

Thanks.
I'll Probably pick up the bx inflator after the holidays.

 

[FishOutUvH2O]

No worries, they're a perfect match. Been using the Bx connector with my SS1 for a couple of years now.