Closed: Atomic Aquatics Z2 yoke 1st stage

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

guruboy

Divemaster
ScubaBoard Supporter
Scuba Instructor
Divemaster
Messages
5,180
Reaction score
844
Location
Palo Alto,CA
Atomic Aquatics Z2 yoke 1st stage

Works but IP creeps to 160psi

Should be serviced prior to use

Used, as pictured

$70
 
Last edited:
After my tests with the new and old Atomic main springs and resulting IP levels I'd be really interested in the free length of a mainspring that delivers IP at 160psi...
Any chance you could measure it please?
 
After my tests with the new and old Atomic main springs and resulting IP levels I'd be really interested in the free length of a mainspring that delivers IP at 160psi...
Any chance you could measure it please?
I'll let you know if I get a chance to measure it. Keep in mind it needs to be serviced, so not sure how relevant the IP is.
 
Thanks... more out of general interest as to what would make the IP spike to 160psi from the Atomic service range 125-145psi.
Sagging spring? Dry o-rings? Hardened lubricant or debris?
 
$70
 
Free shipping on two or more.

All will have engraving on the yoke itself (as shown above).
 
Last edited:
$60
 

Back
Top Bottom