Atomic Aquatics M1 DIN x4

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

CCR Josh

Contributor
Scuba Instructor
Messages
256
Reaction score
15
Location
Utah - Florida
I have 4 DIN Atomic M1 regs to sell. These regs are all in great working condition, not heavily used. I have two with 5' hoses and two with standard short hoses. These regs have actually only ever been used in fresh water.

I am asking $360 each, free shipping in the lower 48.

It is the buyers responsibility to have the regs checked by a qualified technician and recieve proper training before use.

ImageUploadedByTapatalk1361162123.833547.jpgImageUploadedByTapatalk1361162136.796407.jpgImageUploadedByTapatalk1361162146.210152.jpg


Sent from my rebreather using Tapatalk...
 
Can you please tell me what DIN means? I may be interested in the other 2.
 
Can you please tell me what DIN means? I may be interested in the other 2.

Good question! DIN refers to the connection fitting of the 1st stage to the tank valve. It is threaded.

The one on the left is "Yoke", the one on the right is "DIN"

yolk-din.jpg
 
I just found another DIN M1 in my stash. Same condition, same age, etc etc - short hose. Anyone want it for $360?
 
O2 clean? IP?
 
According to Atomic, they are good up to 80%.

IP is still within factory specs, but as stated above it would be the buyers responsibility to have them checked by a factory amortized technician.


Sent from my rebreather using Tapatalk...
 
According to Atomic, they are good up to 80%.

The 80% assumes the reg has only seen O2 clean air/EAN since it left the factory. I'm asking if that's the case for this one, because if so, I'd be interested in it. Thanks.
 
The 80% assumes the reg has only seen O2 clean air/EAN since it left the factory. I'm asking if that's the case for this one, because if so, I'd be interested in it. Thanks.

Gotcha. In short, yes. Our system puts out oxygen compatible air and nitrox, and it has only been used with gas from our system..... BUT according to the manufacturer it is due for it's scheduled service (every 2 years or 300 dives). The reg is about 2 years old now.
 

Back
Top Bottom