arm to connect canon wp-dc9 and ike ds-125

[szeytinoglu]

I'm new to UW photography. I'm planing to buy canon sd-800 and wp-dc9 housing. I want to buy a good strobe with short recycle time which is ikelite ds-125 for me. Which arm should I buy which is compatible with canon housing and ds-125?

 

[Warren_L]

The strobe can be fitted with a standard 1" ball joint, which can then be used with any tray system that uses the same standard 1" ball joint. I believe the housing has the standard 1/4" bolt connector. Check out the Fisheye tray (what I used with my Oly), which uses the 1" ball joints, and you can add whatever arm system that is compatible. I had a set of ULCS arms to fit. The arms that come with the Ike setup will also work.

 

[Dusty2]

Check out the Fantasea line if trays and arms. They all can be set up to use that strobe.

 

[Jim Ernst]

The strobe can be fitted with a standard 1" ball joint, which can then be used with any tray system that uses the same standard 1" ball joint. I believe the housing has the standard 1/4" bolt connector. Check out the Fisheye tray (what I used with my Oly), which uses the 1" ball joints, and you can add whatever arm system that is compatible. I had a set of ULCS arms to fit. The arms that come with the Ike setup will also work.

I am with Warren on this, I use the Ike-Lite DS125'S and there arms and love em!!