Tank601
Contributor
$200 Used 4 dives. works good. Shipped CONUS
Wing features a compact/streamlined design which are not words usually used to describe a wing with a #35 lift capacity. Wing deflated is actually smaller than many #23 wings on the market due to internal perimeter cord that holds the wing as tight to the cylinder and plate as possible. Built in roll control negates the need for a STA.
Will work with most any plate on the market including the Freedom Plate
Reviews on Scuba Board about the Argonaut Wings CLICK HERE
Specs.
Wing features a compact/streamlined design which are not words usually used to describe a wing with a #35 lift capacity. Wing deflated is actually smaller than many #23 wings on the market due to internal perimeter cord that holds the wing as tight to the cylinder and plate as possible. Built in roll control negates the need for a STA.
Will work with most any plate on the market including the Freedom Plate
Reviews on Scuba Board about the Argonaut Wings CLICK HERE
Specs.
- 100% USA Made
- Outer Shell 1680 denier urethane coated
- YKK Zipper, #69 nylon bonded thread.
- Internal perimeter cord to retain shape
- Bladder is 400 denier urethane
- Slots and grommet holes to fit most backplates on the market.
- Grommets are spaced at 9.5" and 12"
- 1000D CORDURA® / DWR / PU Coated
USA made power inflator