Aqua Lung Legend LX Supreme easy question...

[midnite135]

I have what I am sure is an easy question but I have been unable to locate the information..

I ordered an AL Legend LX Supreme (DIN) reg and I know it has 2 HP ports and 4 LP ports, but I cannot find where it tells me the hose sizes these ports take, I think the 4 LP's are 3/8 (confirm?) but cant find it for the HP ports.


Any info I got wrong above I would love to have corrected... it is 4 LP 2 HP right? =)

Thanks

 

[Diver0001]

The sizes are all standard. I'm just going to bump this so someone will tell you the details. the main point is that the HP and LP hoses are different sizes so you can't make any dumb mistakes.

R..

 

[midnite135]

Thank you Diver0001, it wasnt that I was worried about making a mistake, but that I got an SPG and noticed that it was a different size than the low pressure inflator hose. Since its my 1st reg set and its still enroute to me I was hoping to make sure I had the right sizes.

 

[Diver Dennis]

The SPG should be a different size because it goes on the HP port.

 

[The Chairman]

In the early days of USD, there were a few HP ports that were 3/8", but now they are all 7/16". LP ports are usually 3/8" with the exception of some "high flow" models (USD) that use 1/2" for the primary regulator.