Question Anyone using an AOI housing with flash trigger in cold water?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

webcubus

Registered
Messages
43
Reaction score
11
Location
Boston, MA
# of dives
500 - 999
I bought an E-PL9 and am running it in the Backscatter Octo Housing made by AOI. It has a flash trigger/vacuum seal system and the manual states it can operate down to 32F. Well, I hopped into 39F water this morning and the results were not good. The strobes fired irregularly (mostly not at all) and the green light only blinked a couple times. I charged it to full last night and tested both in the car before the dive and once I got home after the dive. In both cases it performed flawlessly - blinking green at a regular interval and firing the strobes 100% of the time. What's the coldest you've been diving with one of these housings (I assume most other AOI housings have the same or similar flash trigger, but please note the model)?
 
Not anything like 39, but routinely do 3 dives at 50F with no issues.
Should be like 94% capacity at 4C.

BVA
 
https://www.shearwater.com/products/swift/

Back
Top Bottom