bolantej
Guest
Convert spring straps for Force Fins? Just curious if anyone has any ideas on how to do this, or if I should just go the bungee way?
Anyone ever do this?
- Thread starter bolantej
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I'm not familiar with how force fins connect to their straps, but Trident (most LDS's carry the line) has several different spring strap conversions available if you have a "post" to connect to.
OP
bolantej
Guest
yeah, that's the problem. Force fins attach to their straps with a little screw through a hole in the fin material. No post.
*Floater*
Contributor
Don't know about spring straps for force fins, but it's easy to make your own bungee straps for them like this:
You don't need thick bungee since it's only needed to keep the fins from dropping on the surface. I think I used 3/16" bungee (but you should measure the diameter of the hole on the FF's to be sure).
You don't need thick bungee since it's only needed to keep the fins from dropping on the surface. I think I used 3/16" bungee (but you should measure the diameter of the hole on the FF's to be sure).
Similar threads
- Poll
