Analox ATA Trimix Analyzer

[MRXRAY]

I have an Analox ATA Trimix Analyzer, case, sampling hose and flow restictor for Trimix. BOTH SENSORS ARE BAD!! This analyzer was working fine the last time I stored it but now both the Helium and the Oxygen sensors are outputting no voltage. New sensors are available at several On-Line stores for about $150 for the O2 Sensor and $250 for the He Sensor. I'm going to offer this as is for $600 plus shipping and handling. Please feel free to PM me or send me an E-Mail at barry.shively@mchsi.com if you have any questions. I live in the Pensacola, Florida area.

 

[mathauck0814]

At that price (once you've purchased new sensors) it would be cheaper to buy a brand new unit with good sensors and a warrantee...

 

[Scared Silly]

This link might help folks: Analox - Dive Right In Scuba - Plainfield, IL as the sensors are the expensive part of the units. The electronics are fairly cheap.

 

[MRXRAY]

I'll lower the price to $550 plus S/H.

 

[mathauck0814]

I'll give you $150 and you have to agree to take it back if it doesn't work once I've replaced the sensors.

This unit can be purchased for $724 here: http://www.diverightinscuba.com/catalog/trimix-analyzer-p-2640.html

That's brand new, with new sensors and a warrantee (and 5% back from the vendor).

Used, with no warrantee, it's worth 1/2 that, so $350. But that's if it works (which it doesn't). So $400 in new sensors makes this (in my mind) worthless. Given that, I think $150 is a fair offer.

 

[MRXRAY]

I'll keep it for $150.00. Any reasonable offers?