canismajor
Contributor
Aeris Atmos XT BC – Sz. XL - with Atomic SS1 Octo and inflatable safety sausage – Used fewer than 25 times - Perfect condition (incl. BCD hanger)
$180
Details:
[FONT=&]Aeris Atmos XT BCD, Black Features[/FONT]
[FONT=&]See size chart[/FONT]
[FONT=&]The new and innovative design of the ATMOS XT allows the freedom of movement and other benefits you have come to expect from a rear-inflation B/C However, the unique wrap-around design of the air cell provides you more lift than most B/C's; as well as an improved, upright orientation when the B/C is inflated and you are on the surface
The ATMOS XT offers multiple adjustment and attachment points, allowing customization of the B/C specific to the divers needs The ATMOS XT is weight-integrated with a combination of dump-able (20 lbs) and non-dumpable (10 lbs) weight pockets, providing the diver an integrated weight capacity of 30 lbs[/FONT]
[FONT=&]Key Features[/FONT]
- [FONT=&]Large, uniquely shaped rear-inflation bladder, provides maximum lift with streamlined design[/FONT]
- [FONT=&]Wrap-around air lobes on each side allow for an upright position on the surface[/FONT]
- [FONT=&]Weight-integrated, dumpable and non-dumpable pockets handle up to 30 lbs[/FONT]
- [FONT=&]Three over pressure relief valves strategically placed to optimize buoyancy control[/FONT]
- [FONT=&]Padded backpack with handle is comfortable and easy to manage[/FONT]
- [FONT=&]Scotchlite reflectors are easy to spot above and below water[/FONT]
- [FONT=&]Multiple adjustment and attachment points for customizing BC fit[/FONT]
- [FONT=&]3 piece system to help get the best fit for each diver[/FONT]
- [FONT=&]Adjustable cummerbund, compensates at all depths for a secure fit[/FONT]
The SS1 is the newest and most sophisticated product of its type, taking the concept to new levels of Convenience, Reliability and Performance. It contains a High Flow Second Stage that performs on the same level as many High Performance Second Stages. It will deliver High Flow Rates to a Diver at Depth with a Minimum of Effort. It is, however very Stable and not prone to unnecessary Free-Flow or Leakage from Water Movement while Swimming, or during Entries or Exits. The Inflator/Deflator is Easy-to-Operate with Soft-Surfaced Buttons placed where they can be Easily-Operated with One-Hand.
One of the most unique features of the SS1 is its Adaptability to almost any BCD. Atomic has designed a Set-of-Adapters (patent pending) to fit virtually every poplar BCD brand available. The Adapters also include components for attaching the Cable Exhaust feature of your existing BCD (if applicable). The SS1 features a Quick Disconnect not only on the Low-Pressure Hose, but the BCD Hose as well. The Adapters that fit the SS1 to the BCD are connected to the SS1 with a Threaded Collar that can be easily Unscrewed-to-Detach it completely from the BCD. Now you can carry or store the SS1 with your Primary Regulator and Gauges (patent pending).
The Atomic SS1 combines the functions of the Inflator and Octopus Regulator into a Single Unit. This Reduces-the-Overall Bulk and Weight of your Dive Gear; Eliminates-Hoses, and places your Back-Up Regulator in a fixed, familiar location. This time proven concept is a Convenient-and-Efficient Alternative to the Dedicated-Octopus Second Stage. Reduce your Rig by One-Hose with the High-Performance Atomic SS1. The High-Flow, Low Pressure Disconnect is Interchangeable with many other Models yet smaller size and Lighter in Weight. Large Oversized and Ergonomically-Shaped Buttons are Easy-to-Find for Pneumatic or Oral Inflation/Deflation. They are Easy-to-Distinguish and Faced with Soft Tactile Rubber Surfaces.
The Elliptically-Shaped Body of the SS1 Lies-Flat against the BCD keeping it Out-of-the-Way and Reducing Drag. Seat Wear is the first cause of Regulator Leaks and Performance Degradation. The Stainless Steel Dynamic Orifice is Pressure Energized and Only-Contacts the Rubber Seat when in Use. Equipped with a Titanium Lever this High-Strength Metal part is the Link to your Air Supply and will Never-Fail due to Rust or Corrosion. The Integrated Purge Cover is a One-Piece Flexible Cover allows Purge of the Regulator when Depressed anywhere on the Cover Surface.
The SS1 has 316 Grade Stainless Steel Inflation/Deflation Stem, Quick Disconnect, Demand Valve Body, Orifice and Springs. The Mouthpiece and Diaphragm are Silicone Rubber and the SS1 Body is manufactured from Fiberglass Reinforced Nylon. The SS1 is a Dependable Downstream Demand Valve Design. The SS1 weighs 7 oz (200 g) without the Hose and the 3/8" Threaded Low Pressure Hose also weighs 7 oz. (200 g) and measures 28" (71 cm) in length. The SS1 comes with an Owner's Manual and is covered by a Limited Lifetime Warranty.
Key Features
- Atomic Safe Second Inflator (SS1),Stainless Steel:
- Increased Safety in Out-of-Air Emergencies
- Lightweight, Streamline, Eliminates Backup-Regulator (Octopus)
- Easily-Operated with One-Hand
- Convenience, Reliability and Performance
- High Flow Second Stage
- High Flow Rates to Diver at Depth with Minimum of Effort
- Stable Not Prone to Free-Flow or Leakage from Water Movement
- Soft-Surfaced Buttons
- Adaptability to Almost Any BCD: Set-of-Adapters
- Quick Disconnect BCD Hose: Easily Unscrewed-to-Detach it Completely from BCD
- Carry or Store the SS1 with Primary Regulator and Gauges
- Inflator and Octopus Regulator in a Single Unit
- Reduces-the-Overall Bulk and Weight of your Dive Gear
- Eliminates Octopus Hose: Reduce Rig by One-Hose
- Convenient-and-Efficient Alternative to Dedicated-Octopus Second Stage
- Large Oversized and Ergonomically-Shaped Buttons
- Easy-to-Find for Pneumatic or Oral Inflation/Deflation
- Elliptically-Shaped Body Lies-Flat Against BCD Keeping it Out-of-the-Way and Reducing Drag
- Stainless Steel Dynamic Orifice is Pressure Energized
- Titanium Lever: High-Strength Metal will Never-Fail Due to Rust or Corrosion
- Integrated Purge Cover is a One-Piece Flexible Cover, Depress Anywhere on Cover Surface
- 316 Grade Stainless Steel Inflation/Deflation Stem, Quick Disconnect, Demand Valve Body, Orifice and Springs
- Silicone Rubber Mouthpiece and Diaphragm
- Housing: Durable Fiberglass Reinforced Nylon
- Dependable Downstream Demand Valve Design
- Weight with Hose: 14 oz (400 g)
- Hose Length: 28" (71 cm) with Standard 3/8" Threads
