Aeris Atmos 1 help needed

[Rookie_J]

the last two dives i've been having problems.

the first dive the computer didn't activate properly, after 15 minutes i resurfaced and it started working fine. i wanted to check to make sure i had "water activate, On") but it won't let me acces any menu functions.

yesterdays dive; deepest was 21', the rest of the dive was spent between 9' - 18' (during a tresure hunt dive with a local dive shop). the dive lasted approximately an hour.

when i surfaced the computer was running through the differnt start-up screens (similar to what it does when you initially start it on the surface) now it is on the "fly countdown".

the problem being, it won't allow me to access anything. i push the button and nothing happens. the manual sez i should be able to access the dive logs and menu screen.

can anyone shed light?

 

[crpntr133]

Not trying to insult you just trying to help. You have to hold the button down for a bit for it to go into the menu and if it is ready for a dive it won't let you access it.
I found out that even though mine has H2O activation on it isn't doing so. I am going to wait till they realease the new model this summer and send it in.
I found out yesterday that I had to push the button twice to get it to kick into dive mode. I checked the manual and didn't see anything about this.
As for the second dive. The computer kicks out at 4' and starts doing the count down to fly and all the other stuff. I to have had troubles getting to view my logged dives shortly after a dive so I am wondering if that is the way it is. If I let it sit and then view them all is well.

Another thing that I have noticed is that I only have 4 logged dives and I have done at least ten on the comp.
Hope this helps a bit but since I am new with the same computer and I don't have things committed to memory as of yet.