Adapter for IP Gauge to LP Hose?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Andrew Dawson

Contributor
Messages
674
Reaction score
306
Location
Kenmore, WA
# of dives
500 - 999
Greetings,

I saw a recommendation for this gage on this forum:

Dive Master IP Gauge Only (LP Hose)

However, how does it connect to an LP hose quick disconnect?

Which adapter screws onto the end of the gage...or do I need a union?

Here is a pic of the gage:

Capture.JPG
 
Worked around, but carefull with the pressure so your IP gauge doesnt bump out! For me it worked well and is even pretty :wink:
 

Attachments

  • 20211022_095137.jpg
    20211022_095137.jpg
    122.3 KB · Views: 52
Greetings,

I saw a recommendation for this gage on this forum:

Dive Master IP Gauge Only (LP Hose)

However, how does it connect to an LP hose quick disconnect?

Which adapter screws onto the end of the gage...or do I need a union?

Here is a pic of the gage:

View attachment 511403
Andrew, that fitting looks like it will screw directly into a standard regulator hose end...the end that normally screws onto a second stage.

If you want to convert it to a standard male BC fitting, then this should do the job:

Again, as others have cautioned, please use some means of venting over pressure if runaway IP should occur.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom