scubapro

Hello, i've been reading the threads and i want to make the step to self service my regulators. how is the best way too start? i know i need to buy some tools for the next regulators and 1st stages scubapro: MK25 evo D420 S620ti scubaforce: black devil SM black devil reg i would need as far...

Just bought a scubapro M5 and missing schematics. Am trying to understand how this guy is built, and above all trying to understand what's the "cracking effort resistence bolt" (the black plastic piece on the right of the barrel with a knot written dive clockwise) is supposed to be attached to...

Hi everyone first time posting here but reading loot of the Threads, good place to learn new Infos :) Relatively "new" Diver with about 90 Dives looking into getting my first own BCD to finally complete my equipment. Mostly diving warm water (min 20°C but mostly 24-30°C) and so far Single...

A dive buddy asked if could 3D design and print a bump cap for the top of the MK17 EVO first stage. His cap got damaged somehow. I drafted it up based on the MK17 first stage that I use. Turns out, they are two different sizes. Of course. It was easy enough to modify the design to suit the MK17...

Anybody have any Mk25s kicking around they would like to sell or trade? Preferably DIN but can consider Yoke as well (will just convert them to DIN later). Looking for multiple first stages.

hi i have a scubapro backplate (5lb) with harness 80$ + shipping thank

Hi! I am finally biting the bullet and investing in a good regulator. I’m already set on buying the MK19 EVO. I’m going back and forth on the second stage option: G260 or S620Ti? I’ve seen a general preference for the G260 but I’m worried about the bulkiness and the weight of it. Is jaw fatigue...

Hi there I'm fairly new to scuba diving, I just passed my Ocean Diver qualification two days ago, and I already started gathering some clutter important pieces of equipment. I bought a Scubapro Glide 1000 BCD for very cheap cheap, and it's in a brand new condition apart from the power inflator...

I arrived after a week in Raja Ampat when I went to download the dives to the computer and there was nothing. It's in the statistics but it missed the dives of the last 2 months. How is it possible on a watch like this? I don't have much luck with the ScubaPro always having problems. I no...

The original rubber hose attached to the SP S620ti second stage was torn which I only noticed after so many dives. The hose and regs set is only 2 years old. Pretty sure it should last me at least 10 years but I digress. I did what I had to do and replaced the hose with a used miflex hose (mint...

I have been disassembling a few cruddy g250/G250v, 109, BA (150), and R190 that I got on lots; on each of these models (except the 250v) I have found both metal and plastic orifices All the metal ones seem to need dressing (if not even dead) I also have ordered a couple reproduction metal...

All equipment are in excellent condition and well taken care of. Used on total 18 dives. Recommend equipment is serviced. 1 Large Scubapro Nighthawk BCD - Black 1 Small Scubapro Ladyhawk BCD - Pink trim 2 Scubapro Mk25 + S600 + R295 secondary + MARES PUCK integrated dive computers (owner...

Light Used around 30 dives. $350 including ship within U.S. mainland.

Hi guys, I have a scubapro mk25evo,buy in2020. 300 dive Now I have see some used atomic t2, it very cheap. Is mk25evo worth replacing with atomic t2? Thanks

Hi, I'm a new diver looking for buying my first regulator set. Following that advice that I have read here often, which is to get something that can be serviced locally, I'm inclined to get a regulator set from Scubapro. On my research I came across the SP regulators user manual from different...

I'm getting back into diving after a long absence. I have a pair of Scubapro Jet Fins with the original rubber straps, and I'd like to retrofit them with spring straps. Looking on the forum, I see three brands commonly mentioned in older posts. I was just wondering, are other newer brands...

Hi everybody, Riccardo from Modena, Northern Italy... I just put my hands on a beautiful G250 Blue Rhapsody, which looks like new, with front cover and G250 and SCUBAPRO writing still perfect. But... because there is always a but... the front cover is somehow "sticky", you touch it and it is...

Hello, I am new to scuba diving and finishing up my Open Water certification course this weekend. I came across a seller on Facebook market with the following regulator bundle and was wondering if it was worth the purchase of $125. My buddy told me the ScubaPro one was a MK2 but I cannot...

Selling my SCUBAPRO Mako Titanium knife with the sheath, leg straps, and Hydros attachment bolts. Never dove it, I acquired it around the time I got my BPW but didn't look into how I'd attach it to the waist, and have since been using a Trilobite instead of figuring it out :) Looking for...

Scubapro Knighthawk Men's Size Large with Integrated Air2. In perfect working order. $450 plus $45 shipping ground USPS to continental US only. This BCD is loved by divers all over the world. I am the original owner. It was purchased in Deerfied Beach, FL from a Scubapro certified dealer. It...