pioneer

  1. maxfanatic

    Sold! Halcyon Pioneer wing, small leak

    For sale is a Halcyon Pioneer wing, I believe the 27lb lift version. There is a small pinhole leak just inside the hip dump -- it is in principle reachable with a tool or a finger if one wanted to try a DIY patch fix. I take no responsibility for the performance of this wing as is, or for the...
  2. 1

    Halcyon BP from Pioneer to Eclipse Wing?

    Ok so I recently purchased an Eclipse wing to replace and old leaking Pioneer wing. I was under the impression the Eclipse was just an updated model of the Pioneer. So needless to say when I went to install the wing the backplate I was surprised to realize there are no tank strap slots or...
  3. dave22387

    OPV Repair on old Halcyon Pioneer

    So I was doing my ritualistic pre-dive checks and noticed my OPV was leaking. When I checked to ensure it was screwed on tight the whole thing basically separated from the BC. It seems that the pioneer is a one-piece shell and does not have an internal separate bladder. Is this something that...
  4. Pacifico

    New Liveaboard itinerary - Munda to Rabaul via Shortlands and Bougainville!

    Hey all those interested in diving sites that have rarely been surveyed in recent decades, Solomon Island Dive Expeditions appears to be offering new itnireraries in PNG. A result of this seems to be transit trips between Munda and Rabaul, and hitting remote (from a SCUBA perspective) sites...
  5. P

    Closed: SOLD - Halcyon Pioneer 27 Wing w-Tagge 316 SST Backplate (#2)

    Up for sale is a 316 Stainless Steel backplate with Halcyon Pioneer 27 wing and 2-piece Single Tank Adapter (STA). The backplate was made by Fred Tagge in 2002 and is about 15.5 inches long and made from 0.12-inch-thick stainless. The total weight of the backplate, wing, and STA, with all straps...
  6. P

    Closed: SOLD- Halcyon Pioneer 27 Wing w-Tagge 316 SST Backplate (#1)

    Up for sale is a 316 Stainless Steel backplate with Halcyon Pioneer 27 wing and 2-piece Single Tank Adapter (STA). The backplate was made by Fred Tagge in 2002 and is about 15.5 inches long and made from 0.12-inch-thick stainless. The total weight of the backplate, wing, and STA, with all straps...
  7. ocpaul

    For Sale Halcyon Pioneer System with 36# lift

    Cleaning out a 2004 vintage Halcyon Pioneer Multifunction Compensator (MC) system with a 36# lift (blue sides) bag. This includes the MC Storage Pak for an alternate lift device, a Stainless Steel backplate, harness and crotch strap. I disposed of the AC integrated weight pockets some time...
Back
Top Bottom