continious blending

  1. Marten Deinum

    Suggestion for Nitrox Stick O2 flow

    Hi, Recently we decided to build a Nitrox stick to be able to fill Nitrox up to 40%. All this is being fed into a compressor that produces 400l/m. We have some medical flow regulators that go up to 18l/m but that isn't near enough to get a decent Nitrox mix. Some calculations show that we...
  2. S

    Making a O2 / Nitrox stick

    This forum was very helpful with learning about building a stick so just wanted to say thanks and share my setup / progress Also, if anyone sees something I am missing or suggestions for improvement I am all ears. Still need to get a o2 tank and fixed mount the hardware Everything was...
  3. A

    LMNT King helium rising while continious blending

    Recently I have assembled a continious blending system. It runs on MCH6 Comtri 1 phase electrical compressor. I did some measuring and it does 90-100 l/min output. For blending I use LMNT King blender . Now I set both O2 and He limiters to run 2 bar. Adjust the needle valves on King to be output...
Back
Top Bottom