bailout

  1. PEDiver

    Sidemount Bailout Config?

    Didn't see a thread on this so thought I would ask. If you're diving a BM unit and are sidemounting bailout, how do you have that configured? Are you running loop bungees from the backplate and using a butt plate or metal stand to clip off the SM tanks? I've seen some premade options from...
  2. SavageSeaCow

    Question PO2 for bottom bailout when off-boarding diluent

    I’ve noticed that some divers for especially deep or technical diving are choosing to off board diluent in their bailout cylinders. This is more or less how the whole sidewinder/Gemini community does it in my understanding. My question for anyone who does this is, how do you choose the PO2 of...
  3. tomsch

    Flowstop on bottom gas bailout?

    I started with rebreather diving(tdi helitrox) last summer and am currently starting with simulated and real deco dives with enough deco time to make a 50% O2 stage viable. But apart from that I thought a little bit about BO configs and the idea on a flowstop, like the one apeks produces, on my...
  4. LFMarm

    Question Dive time management - multi-level vs. square profile

    Hi all, Would love to hear feedback on the approach I am envisioning for managing real life multi-level long deco dives on CCR. Below is my approach and a couple of simulated examples to show how it would work in the water. Configuration is CCR with on-board oxygen; 2 AL80 tanks for diluent and...
  5. LFMarm

    Strategy for bailout calculation

    I have been playing with developing bailout plans for CCR dives. The approach I was trained on is to calculate gas required for safe ascent to surface taking into account all deco obligations from the worst possible point of the dive (typically the end of the bottom part of the dive). I would...
  6. fsardone

    Three strikes and you are out - A rebreather tale

    Hello everybody, A little near miss (or two) which ended up with an aborted dive no consequences, but the thought process might provide points to ponder. Me and a frequent buddy meet at a lake location for a fairly deep dive. Plan is to follow a guideline starting at shore, follow it to a...
  7. The Cosmicist

    Closed WTB Ended - Bailout/Stage Reg Set for Pony Bottle

    Hello everyone, I'm looking for a bailout/deco reg set that will first see use on a pony bottle, then maybe on a stage cylinder later. If beggars can be choosers, I'd like something environmentally sealed and diaphragm (or Poseidon haha). Something like DGX, Dive Rite, ScubaPro, etc. It's fine...
  8. N

    BOV: Shrimp vs Divesoft?

    Would love to hear the pros and cons of the shrimp bov and divesoft bov. -What has your experience been like? -What do you like or dislike about the bov you are currently using? -Can it be user serviced? Are parts easy to find? For the Divesoft, if you have the BOV + ADV version, I'd love to...
  9. D

    Closed: NO LONGER AVAILABLE Scubapro MK2 and R380 with pony bottle gauge. RBS system. Used once.

    MK2 R380 and pony bottle gauge, used once. Bailout setup. | eBay Scubapro MK2 and R380 with pony bottle gauge Used once. Came from man who had heart attack and can no longer dive Unit is in excellent condition and clean Buy with pony tamer and x-bracket and will refund 20%
  10. Long-John-Silver

    Petrel 2 EXT CCR bailout procedure

    Hi guys, I have two Petrel 2: one as controller tied to my SF2 and a Petrel 2 EXT connected via fisher cable. Both have the second to last firmware update (IIRC the last one just introduce new language translations). While experimenting with the bailout procedures on my SF2 Petrel controller I...
Back
Top Bottom