Search results

Low Hours and low usage. < 125 hours on this compressor. This is in very good shape and ready for use on a boat/shop/home. What you are getting: 1 RIX SA-6 Nitrox Compressor 1 Nitrox Filter Canister 1 Disconnect with Hobbs Hour Meter and pressure shutoff Unit has a 5 HP 3 phase electric...

I have a brand new Suunto Stinger dive computer. I found it in my inventory stuffed away in the corner of my shop and did not realize I had it. It was sent to Aqualung for a service, new battery and test which costs $120 . It has a warranty card in the box. (Since it has never been sold, it may...

4" is pretty small. I see that they have HD LCD monitors with inputs now for about 80 bucks. But, with a 4" housing, you are going to have a small monitor. It would be nice if you could hack a monitor from an old video camera. Small and good on batteries. I have the equinox rear screen...

I'm cleaning out the closet. This is a homebuilt housing that I just do not need anymore. It has been to 130' and was built for a JVC camera. The control originally was done with a magnetic switch and a remote control. I had installed an Ikelite manual control to operate the camera. This housing...

First; My heart goes out to the family, the instructor, the Dive Shop and all those involved. As a diveshop owner / instructor I understand the want for information. However; as fate would have it, his sister and brother work at the same place as I do. (Dayjob) There are already rumors flying...

I would recommend www.ulcs.com Ultralight was very friendly and sold be the parts for mounting my UK Light Cannons to my DIY Housing. They have just about everything and it is real quality. Our Divemaster on the last trip dropped my housing and broke my handle. I attached a longer arm...

Ok, It seems that High Definition Cameras really seem to have an issue with low light. Using a JVC GY-HD100 you have to crank down 3 F stops to be of any use in low light. I am trying to make a decision on "if" to go to HD underwater. But I wanted to know opinions of those using HD...

We have openings on the Sundiver (Out of Longbeach) to the backside of Catalina on the 21st of April. Advanced divers only, We are shooting for Farnsworth banks. If interested it is $150.00. Call the shop at 909.798.3483. Last day to sign up is on the 19th. :blinking: www.empirescuba.com

Hmm. IMHO; I would think that cloth would add much hated drag. I would also be a bit worried if you had to ditch/don the system with a cloth cover over a tank. I prefer to keep all equipment in the open so that a potential problem (leak, failure) could be seen and dealt with easily. The Scuba...

Yep, use the Fusion paint. Also PVC sometimes has a slick coating. I turned mine on a lathe (or use wet/dry sandpaper to rough it up a bit.) I have not had problems with paint coming off using the above method.

We have openings on the Sundiver for March 18 to Catalina. It is a light boat and the weather looks good! OW Newbies are welcome! We also have openings on the Sundiver for April 21st. This is scheduled to be a Catalina backside trip. (Advanced Certifications and higher only):no No OW Certs...

We have openings on the Mr. C out of San Pedro. Destination is Catalina.:D Cost:$100.00 Destination: Catalina Island Leaves from: 22nd Street Landing, San Pedro Boarding time: 6:00 am Return: 6:00pm DOES NOT INCLUDE: Air fills or food. You must bring your own tank. Air fills are $5.00...

I am using 1/2" Abrasion Resistant Polycarbonate from McMaster Carr. Part Number 8707K152. Is there something better I could be using? I used it because it is appears to be real tough. I am open to suggestions! BTW, They did not touch any of my other tools. just my 6" phillips driver...

I have a zoom through wide angle. The upper control allows me to zoom in/out. It is an extreme wideangle that I got from BH photo for the JVC. Yes, TSA removed the screwdriver from my checked baggage. Nice snapon. (They probably needed it for something). I had it packed in a compartment...

Hi all; I just wanted to share my experience with building my underwater housings. I have posted in the past but would like to pass on some information. Here is what I have learned from doing this for the last few years. First, a wide angle lens is a must! Without it your video will be...

Anyone know where I can get a repair manual (looking for torque specs) for an Ingersoll Rand 10T2? Thanks in advance

Have you been to www.superbrightleds.com? We were looking at some of the calcs on the new leds http://www.cree.com/products/xlamp_new.asp However; be careful with the viewing angle. I'm still working out the angles and the distances to get the best "flood" at 1-4 feet distance. I may need...

I just now started reading through this thread on homebuilt housings. I too was dismayed a few years ago when I wanted to put my video camera in the sea. I made mine over 4 years ago and it has been all over the world with me to over 120 ft. I use JVC cameras and luckily, they all use the same...

We have 4 openings on the Sundiver (Long Beach) http://www.sundiver.net/ for tomorrow. People are backing out due to colds and flus. If you would like to go, call the shop and you can charge it on the phone or bring a check to the boat. We have 4 spots open. If interested call the shop...