Search results

  1. N

    NEED STRAIGHT IKELITE VIEWFINDER FOR CANON T2

    John: I talked to Mike from Ikelite. I’m actually looking for the Ikelite straight magnified viewfinder, not the stock viewfinder that comes with the housing. Found a store where I could pay on installments. Thanks for your response to my posting and willingness of helping me . Nilo
  2. N

    NEED STRAIGHT IKELITE VIEWFINDER FOR CANON T2

    Will talk to him tomorrow
  3. N

    NEED STRAIGHT IKELITE VIEWFINDER FOR CANON T2

    John: Can you please post a photo of the one you got? Nilo
  4. N

    NEED STRAIGHT IKELITE VIEWFINDER FOR CANON T2

    Any body have an Ikelite straight viewfinder for a Canon T2 for sale?
  5. N

    Ikelite DS51 diffuser holder

    Solution to retain the diffuser on an Ikelite DS51 strobe: Buy a 3 inch no hub coupling from Home Depot. The coupling has a lid inside, which will be used to hold the diffuser in place. Take one of the stainless steel clamp from the fastener. You will use it to secure the diffuser holder. Cut...
  6. N

    Ikelite DS51 Diffusers - Difficulty Staying On

    Here’s my solution: Buy a 3 inch no hub coupling from Home Depot. The coupling has a lid inside, which will be used to hold the diffuser in place. Take one of the stainless steel clamp from the fastener. You will use to secure the diffuser holder. Cut the coupling to remove the extra...
  7. N

    GoPro Mount for Ikelite

    Compressor: Glad to help you and others. I didn’t used a washer on the bottom cap. I used 1/2” PVC pipe. As an added benefit you could leave the bottom cap attached to the housing and attach and detach the top portion. Useful when you have to replace the battery on the GoPro.
  8. N

    GoPro Mount for Ikelite

    I drilled two holes on the PVC pipe to allow water inside the pipe. I drilled a hole on the bottom cap and used a nut to secure it to Ikelite mount. On the top cap I used a screw to mount the GoPro mount.
  9. N

    GoPro Mount for Ikelite

    Please look at my posting, under this thread. I needed to mount my GoPro higher, due to the wide angle dome port.
  10. N

    Magic Filter holder for Canon 10-22mm APS lens

    Just came from a workshop in Grand Cayman with Alex Mustard. Bought a Magic Filter for my Canon 10-22mm lens. You need a filter holder to secure you filter in front of the lens. I bought this Cokin filter holder on Ebay for less than $8.00
  11. N

    GoPro Mount for Ikelite

    Here’s my DIY solution. I drilled two holes on the PVC . Cheaper than $40 from Ikelite. Total cost less than $5.00.
  12. N

    DIY Anti reflection Rings

    Instead of paying $10 per ring from Ikelite you could buy 10 sheets of Craftables Matte Black Vinyl Sheets - Permanent, Adhesive, Matte & Waterproof | (10) 12" x 12" for $12.00 and cut your own rings for all your lenses, plus all your friends lenses too. Just use a protractor to draw the...
Back
Top Bottom