Search results

  1. phoque

    Why do Used Divesoft Liberty's Lose so much value?

    Well, I will be following the resulting discussion with high interest, despite not having concrete answers to the questions you bring forth. I am the guy who spoke with you directly about purchasing your unit yesterday but I guess the terms etc are up in the air now and a new price will shortly...
  2. phoque

    Santi Thermovalve air leak into drysuit

    I have a Santi and a Light Monkey connector, the ones that only provide the e/o cable and stack with your normal inflation valve. A little higher profile than the standalone thermovalve, but no big deal. The Light Monkey needs the threads of your existing inflation valve to be clearanced/filed...
  3. phoque

    Santi Thermovalve air leak into drysuit

    I have the 303 thermovalve and have experienced the exact same issue of runaway inflation. Happened a first time after maybe a dozen dives without issue, and tested out of water to diagnose the problem. Seems the button doesn't recoil 100% back up, and lets gas slowly into the suit. I...
  4. phoque

    Sold! XDeep Project Aluminum BP (Large) and Wing

    I highly doubt it. The pics on xdeep's site still show 3 holes and 2 rows of cutouts like on mine. Also, you have 6 holes on the bottom sides that appear closer together than the 7 holes large plates have, which appear more spaced as compared to the hole diameter (which is standard). Not trying...
  5. phoque

    Sold! XDeep Project Aluminum BP (Large) and Wing

    17.75 inches tall from lowest point to highest point (on each side, not the center channel). Pic attached. It is possible the dealer you purchased from sent you the wrong size, unless the design has somehow changed since I bought my plates (admittedly a few years ago). You can also notice that...
  6. phoque

    Sold! XDeep Project Aluminum BP (Large) and Wing

    Both a Zen and a Project. I can measure my backplate to clarify.
  7. phoque

    Sold! XDeep Project Aluminum BP (Large) and Wing

    I believe the plate pictured is the small version, not size large as described. Mine has 3 holes (large) and a buddy of mine who has a small has 2 holes in it, just like the picture.
  8. phoque

    Question How does pressure increase with depth in water?

    OK, don't have too much time to write a detailed answer, but to get back to @lowwall 's point and question with his 2 gauges x and y, the 2 gauges will read the same pressure regardless of their position under the roof or the thin tube, as long as they are at the same depth. What you need to...
  9. phoque

    Closed ScubaPro Hydros Pro

    Indeed, also tried to message unsuccessfully. Was interested in purchasing both the hydros pro and the evolve 40. Let me know if previous responders end up not buying. Thanks!
  10. phoque

    Wanted 2x Faber HDG HP100 - New England

    I realize the odds are slim, but if you have 1 or preferentially 2 Faber galvanized HP100 you'd like to sell, let me know. Boston location so anywhere within reasonable distance in NE should be ok, or shipped if you are willing. Not interested in other sizes, other manufacturers (PST...
  11. phoque

    Broken clavicle

    So, my story is not directly relevant to your specific injury but thought I'd share the outcome as I can definitely relate to your desire to get back in the water as soon as possible, and I had a very positive story, so perhaps that might help the morale. I had a double tibia/fibula fracture on...
  12. phoque

    Hit 50Bar becoming uncontrollable positive bouyant problem ..

    Well, either you need more ballast, or you are not properly venting your bcd on ascent. Is the bcd completely empty at your safety stop? If yes, add a few more pounds on your next dive and check your bcd again at the safety stop. If you still can’t maintain your stop depth with an empty wing...
  13. phoque

    Santi Elite + flexibility for reaching posts on twinset

    So I've had the Elite + for a little over 3 years now, and haven't had any issue. I dive it year round in New England, and valve drills are relatively easy, even in mid-winter training at the pond in the thickest underlayers and glove liners I will wear. In winter, I dive a Santi Flex 190 (one...
  14. phoque

    Question Apeks DST not fitting tank

    It is normal that the reg does not screw in all the way, as you have a 200 bar DIN valve and the reg is designed to seal in both 200 and 300 bar DIN valves (which have more threads). It shouldn't leak. Is the o-ring at the end of the male DIN stem on your first stage present? If yes, check that...
  15. phoque

    Question What is your tolerance for error in your SPG?

    Well, I had a gauge which gave me under readings of about 150-200 psi on full tanks, and eventually replaced it, but more because it annoyed me a bit rather than presenting an actual risk of any sort. As outlined above, the potentially serious issue it may bring would be over reading at low...
  16. phoque

    Apeks DSX dive computer: Any info?

    OK, you had me a little worried for a bit as I had a DSX coming in the mail as I read about your first experience with it in the pool. I received it last week, and haven't had time to play with it much yet aside from browsing the different menus and familiarizing myself a bit with the general...
  17. phoque

    F4U Corsair Wreck Photogrammetry Model (Pt Loma -- 120 fsw)

    Superb! Thank you for sharing your work.
  18. phoque

    Closed 2x Apeks Black Pearl

    It's an identifying number, that can be seen on the box photo under the barcode. One is 1802, the other is 2463 it seems.
Back
Top Bottom