Search results

  1. Jordi

    Question Intermediate pressure Interspiro Divator MKII

    Trying to get an old Interspiro FFM mask in working order. Does anybody know the IP for the Divator MKII? Even better, does anyone have the service manuals for it? Best regards Jordi
  2. Jordi

    Load resistor for a galvanic oxygen sensor

    I am a new RB diver and I am diving the KISS Classic. In the last dive the reading from one of the cells started shifting erratically. Wiggling the cable at the point of attachment to the sensor head or swapping to another cable solved the problem so the issue is a bad connection. I have now...
  3. Jordi

    How much is an old KISS classic worth?

    Hi guys. I understand this is an impossible question because there are way to many factors to weigh in but I give it a shot. I am considering buying a KISS classic that is 20 years old and has not been dived for a while. The owner is a buddy I fully trust, an experienced rebreather diver with...
  4. Jordi

    2nd stage Apeks ATX40 fine tuning

    Hi guys. I use an Apeks ATX40 with a DS4 on my stage cylinder and diving in cold water (16 deg C down to 2 in the Swedish winter). Last winter the second stage freeflowed often and this disappeared when water temperature became higher. I swapped the second stage for another one and decided to...
  5. Jordi

    Apeks setting tools

    I am looking into the Apeks setting tools to adjust the lever height in second stages, the AT68 for ATX and the AT69 for TX regulators. They are not cheap but nothing is cheap in the diving world but each regulator family seems to have its own. In the end all the tool does is to check the...
  6. Jordi

    Dacor D20 thread on swivel port

    Hi guys. I have a Dacor D20 in mint condition that I would like to get into the water. What bothers me is the special swivel coupling port that connects to the octopus. I am referring to piece 169 in the schematics attached. I would simply like to plug that port and use the regular 3/8 for...
  7. Jordi

    Aqualung Impulse Cryo Poppet

    Hi. My Aqualung Impulse Cryo second stage leaks. When I took it apart I found out that the poppet (27b, part 107826) is broken so the actual LP seat does not make a seal (see picture). Unfortunately very few Aqualung second stages seem to have the same part (Impulse, Impulse Octo and Impulse...
  8. Jordi

    A second life for low pressure seats

    Looking for opinions on the reuse of low pressure seats. I have a few second stages for which service kits are hard to find or not available (Davor Vyper) but even Scubapro R190 or R380 have flat poppets/low pressure seats. If the back side is still flat and unmarked it should be OK to reuse...
  9. Jordi

    Anyone with diving experience from Greg's Wall, Radama Archipelago, Madagascar?

    I have been looking into Greg's Wall divesite in Madagascar. It seems to be very remote and only a few dive operations in Nosy Be seem to have it in their "menu". I have sent some emails but got no response yet so I was wandering if anyone here had been there. It seems that there are plenty of...
  10. Jordi

    Removing the reserve lever from a J-valve

    I understand that there can be safety issues involved in my question but is it possible to plug the reserve lever side in a J-valve? Wouldn't that convert it into a K-like valve? By the looks of it, it would be simply a matter of replacing the current thread that secures the reserve internal pin...
  11. Jordi

    Old Scubapro. Similar to MK V and MK10 but not quite

    3 First Stages Together by Jordi posted Sep 20, 2019 at 9:39 PM I appreciate any help to identify the first stage in the middle. The one on the left is an MK V and the one on the right is an MK 10. The one in the middle has the body of the MK V but the 5th LP port on top of the turret is tipping...
  12. Jordi

    Spiro Pioneer Service Manuals

    Trying to locate the service manual for a Spiro Pioneer YOKE first stage. No luck at vintagedoublehose or frogkick. Best I could find is the parts description at www.spiro-vintage.com but I was hoping someone out there would have access to the full service manual. Thanks in advance. Jordi
  13. Jordi

    Identify brand of jetfin type

    Hi all. I inherited an old pair of solid rubber fins, similar to the current jet fins. They are not vintage in the true sense of the word, they are probably from the 90s. I do not recognize the logo and the brand. Can anyone help with that? See attached file with picture Best regards Jordi...
  14. Jordi

    ID an old DIN first stage

    My first thread on this site, where I constantly find interesting info. Recently purchased a bunch of old gear and I am trying to restore some of it. The one in the picture looks like an OCEANIC PX2 but it is not, I am guessing a bit older but I have not been able to identify it further. There...
Back
Top Bottom