Search results

  1. jgttrey

    ScubaPro MK10 IP Question

    So I've got two MK10s that I just revived from the bin at the shop and serviced. One had an old red seat, the other had a -II gray seat. Even though everything was in good shape, because these were basically bags of parts, I did not have the opportunity to test them before service, so I...
  2. jgttrey

    Zeagle - shuttle valve orientation

    Short version: In servicing a Zeagle Flathead VI/7 or F8 second stage, when inserting the shuttle valve in the barrel, does it matter whether the short leg "L" shape on the shuttle faces towards or away from the diaphragm? To be clear, I understand the importance of orienting the shuttle valve...
  3. jgttrey

    Meg BOV options - Divesoft vs ISC

    Looking at BOV options for my Meg. Not super interested in the GG because I don't want to deal with the customer service issue (even if I mitigate that by going through SubGravity rather than GG). So, I've narrowed it down to the ISC BOV and the Divesoft. I would be grateful for the...
  4. jgttrey

    O-MD E-M10 Viewfinder/Display not showing photos

    I'm posting for a friend currently at Socorro and with very limited ability to communicate. I can't help him myself because I shoot Sony and Canon and no nothing about Olympus. Hoping SB can come through with advice because Socorro is the last place you want your camera to go down.... He's on...
  5. jgttrey

    Molex Connectors

    I'm building a little cell-checker pressure pot. As planned, it gives me the option of either using a separate black box with three 0-200 mV voltmeters or, using a different cable, plugging into the rebreather head and reading voltages on my handset. Looking for a (hopefully) easy source for...
  6. jgttrey

    Apeks DS4 - IP creeps then holds

    I've been servicing my Apeks DS4 first stages for a while with no problems. I bought a used one just to have around as a spare and because the deal was good. I recently O2 cleaned and serviced it. Here's my question: IP locks up reliably but then creeps up about 10 psi and then stays...
  7. jgttrey

    Tips for removing copper crush washer from cylinder valve

    The title says it all. I'm overhauling some cylinder valves (Blue Steel FWIW), and the old copper crush washer/gasket is pretty well stuck in there. Any pro tips for getting it out without mucking around too much? It's almost like it's welded in there. Many thanks.
  8. jgttrey

    Closed: Oceanic Excursion BCD - XL - SOLD

    Bought new in summer 2013. Has the updated QLR3 weight system (the older black versions were the subject of a recall, these are the new version, which are grey). As you can see from the pictures, this is in 9/10 condition. Looking at my logbook, I had approximately 25-30 dives, at most, on...
  9. jgttrey

    For Sale Petrel 2 - SOLD

    Selling an excellent condition Petrel 2. It's in great shape. A few very minor scuffs around the edge of the screen where the screen protector didn't cover, but pristine otherwise. Tried to capture it on the photos. I'd give the condition 9/10. 98 dives/72 hours. Updated to the current...
  10. jgttrey

    Identifying Stages By Feel

    Pretty much captured it in the title. IANTD standards for CCR TMX require removing, swimming away and replacing stages in the correct places by feel (i.e., no looking at the MOD markings) to simulate recovering a cylinder when vis is shot. What are common/best practices for tactile...
  11. jgttrey

    Zeagle F8 manual

    Does anyone have a link to a service manual covering the F8 second stage?
Back
Top Bottom