Search results

Cold water diving is very nice. This was a deep dive (48m) with a runtime of 70 min, so you have to dress properly.

A cool little tugboat in the fjord nearby my home.

The amount of weight is individual, i am a cold water diver and made it 10 kg to meet my wishes. What you need and prefer is up to you. Just add 500g extra lead when you melt it, you will lose it in slag etc.

This is how i made a removable P-weight for my backplate. It make the transportation on land easier, also easier to handle the rig out of the water. The video don`t show the 6mm bungee that lock the weight in the top of the backplate, sorry for that. But i think you understand the concept :)

This is how i made mine for a Nauticam housing, i think it could be adapted to other housings.

Thank`s laikabear. Yes i think it was a young and curious shark. Here is another one, he wanted to join in a selfie :)

I appreciate the thumb and the subscribers on my channel. There is also some other videos from the trip there. A "how to take shark-selfie" and longer video from the tragedy of the Salem Express wreck

Thank`s for the nice feedback. We had one hour of drifting away from the mothership, finally when we were picked up the entry to the boat went quit fast. I was the last out of the water, and i followed the shark with my eyes all the time :)

During a drift dive in the big blue at Elphinstone/Red Sea, a Oceanic whitetip attack and destroyed my SMB. We had a unforgettible dive in the blue with this curious and fantastic creature who wanted to taste my equipment The sharks rule.

I just used 2 old broken S&S cable`s, and drilled a hole in. Earlier i considered this Howshot Fiber Adapter L for Sea&Sea YS strobes- This fiber adapter L is for Sea&Sea YS style connector. , but i`m not sure how big cable this can handle and i don't want the 90 degree angle this adapter creates.

It is easy, assuming a thinner cable also can be used. It will also be more flexible. Use a razor blade to cut it straight.

This is a DIY video about building your custom lenght fiber cabel to your flash. This cabel also work with the nauticam flash trigger. Nauticam tells on their site that the Sea & Sea YS-D2 is not compatible with their trigger. Here is a work around. Hopefully nauticam and Sea & Sea send me a...

Thanks Carl. I use a Sony A7 with a 90mm,10+ diopter and two regular video-lights.

Here is a clip of some Polycera quadrilineata nudis i have filmed recently.

This is my first experience in the Red Sea, a northern route with wrecks and reefs. Red Sea September 2016 I can really recommend liveaboard, but next time we will stay 10 days.

This is how i made my quatropod, it is easy and cheap and will improve your film quality DIY quatropod for underwater housing

Hi, the securus filter system in our bauer mini verticus compressor is causing some trouble from time to time over the last year. I think the main problem is a bad or broken cable from the filter. We have been running our filter replacement consistently at hour interval, and having good...

Well, my backpressure in the filter cartridges is 180bar, so i thought the pressure in the stages should be stable at the most of the 232bar filling. My manual says 6-6,5 bar in 1st and 45-47 bar in 2nd. but not on witch final pressure. I have no open the the 2nd stage, and the valveplates...

Hi, a little more information could be helpfully. Have you cheked the condensat drain valve, is it leaking ? What about the safety-valves ? Tried a "blow-by" test ?

I did not monitor the 1-stage pressure. The 2-stage pressure was stable on a 15l 232bar filling from 0-232 bar.