Search results

How do I unsubscribe from SB all together. I and several others want to know.

Looking for the proper BP setting for the compressor to run ballanced. Does any one have that info. Also i have a fiilter tower about 30 " tall and perphaps 4 " OD It takes about a 28" long filter cartridge. what is min dwell time I should have for the 6 cfm compressor. For those that use...

Does anyone know of non diving devices that can link to a AI xmitter and display the PSI data.

i Am making a controller unit for my compressor, and I am stuck. the logic of ooperation is a cake walk but I want to include a 120 outlet on it to plug a fan into and be controlled by the unnit. I have 240 single phase coming in to the controller. I am getting a step down transformer to...

I have been reading as much as i can understand regarding GF's I have the most basic concepts down now except for one aspect. I understand how GF low sets the first stop but talk of GF high setting the NDL time evades me. So the question is how does GF's effect the NDL to where some...

I found this light on ebay . It is very bright and IMO very reasonable priced for the light it puts out. I paid 125 for mine. I got the 3 led 3000 lumen light head. 3000LM CREE XML-U2 Scuba Dive Light Diving flashlight Torch 150m Underwater

Saw this watch on the net while looking for vintage equipment. notice the bezel. its a dive table. Does anyone know anything about this watch and whether it has a split bezel like it appears. If it is a split bezel you could use it for nitrox I would really love to have one of these for a...

I guess this should be a basic question but I am lost for and explaination. My tanks have REE#s on them from like 94-99. Is this number a reference to a proceedural document or is it a value to use in a standard equation. Such as the # is the immediate expansion recovery amount to pass...

Hi Having problems with pay pal paying the supporter subscription. Twice it has emaied me saying that: The payment for your subscription to ScubaBoard Supporter Annual Subscription failed because of a problem with your credit card.ScubaBoard, Inc has been notified of this failed payment...

I just hooked up the electric capitano after sitting for 2 years or so. Ran it up to 3700# and shut it down. (No air leaks) Over a week of use the max pressure has dropped to 2000 psi. What am i looking at as far as a repair job. A valve maintenance kit is around 250.00 and a 3rd stage...

I just got a pair of Faber lp120's. Many will call them 121's or be listed as 121's but hold 125. The only physical difference in them that I acan see is that one tank has factory XS Scuba stamped in the neck and the other does not. One tank has REE code of 97 and the other has 98. These...

I decided to spring for some DVD's and quite frankly i am very dissappointed. The ESM dvd's is pretty well a guttless series untill the 2nd dvd and once the AU guy is finished someone talkes about ballenced rig. $130.00 usd. I think that the ESM delt with mask snorkle, a little bit of...

A number of threads concerning compressor inlet hoses and filters seem to get to some aspect of too much suction for the hose or too much vaccum. Just how much vaccum is acceptable at the 1st stage inlet. I have 2 compressors a rix6 and a capertino and never gave it any thought till lately.

I am posting this for my local dive club GETMORE INFO AT BAY AREA DIVERS SCUBA Club of Houston, Texas - Home Page http://www.bayareadivers.org/ Bay Area Divers Scuba Divers Market & Expo with great vendors and incredible deals! Thanks to all the volunteers of and the Board of Directors...

At one time there was a buttomn between forum and blog that said chat. about a week ago that button dissappeared. the only way i could get into chat was to go into forum and go to the satatistics at the bottom on the page where it said x# in chat room when i clicked chat roon from there i...

What are the pros and cons of 13x desicant bead size. i can get 13X Type Molecular Sieve Desiccant 1/8" Bead for a 4 X 8 mesh screen size size varies from .093 to .185. or 13X Type Molecular Sieve Desiccant 1/16" Bead for a 8 x 12 mesh size screen *** The actual bead...

Looking for input on the prefered switch type for backup lights. I find mag switch, manual switch, twist heads, ect. Also what is the normal light brightness that is used. I know this will start the lux lumen thing however I need start point. Perhapd beam width is something i need to...

i am setting up a doubles rig and have dr right and left valves but no cross bar. i have found bands that are 8.5" / 215mm valve centers for a 7 inch tank lp85's i look at the 200 bar set and it says for 7.25 - 8 inch tanks. i also am looking at a set of bands for 8 inch tanks also...

I stumbled onto this article while looking for info on GUE UTD AND DIR techniques and improvement skills. The attitude that unless you are DIR you are a danger and hazzard to you your bubby and the universe is think is unacceptable. I had a lot of respect for those who excelled in the...