Search results

  1. gqllc007

    Quick question on DIN conversion

    I had a 67 fiberglass Dune Buggy....I could do the points...exchange the engine...rebuild the engine...but no instructions for this
  2. gqllc007

    Quick question on DIN conversion

    Actually the universal DIN kit comes with the pre installed wheel retainer O ring and a loose O ring part 01050347 that seals against the regulator body which is small and the loose "extra" O ring that apparently works the way Angelo said. There is also the DIN O ring for the valve preinstalled...
  3. gqllc007

    Quick question on DIN conversion

    Angelo answered the question on the separate O ring..he is correct it is universal DIN kit. The instructions said to lubricate the O ring and the threads. The excess was wiped off prior to install...and it was a really tiny amount although the picture looks like it was mucked up!
  4. gqllc007

    Quick question on DIN conversion

    This is how it looked to me. There is indeed a groove in part 10. When I removed the yoke assembly there was no O ring in that groove so I figured no O ring in the DIN part. Since I had an "extra" O ring I put it in the groove and when I went to thread part 10 into the regulator body the O ring...
  5. gqllc007

    Quick question on DIN conversion

    Ok great. That is what I figured. I converted it and checked it under pressure and all was good.
  6. gqllc007

    Quick question on DIN conversion

  7. gqllc007

    Quick question on DIN conversion

    I am converting my ScubaPro Mk19 from yoke to DIN. I am questioning what is this O-ring for? I think it’s an extra wheel retaining O-ring?? The kit already has an o ring retaining the wheel installed. I know where the small Oring goes but where does this one go??
  8. gqllc007

    Trip Report Juliet - Bimini - Oct 2-8

    How many days did the patch last with the diving?
  9. gqllc007

    Custom Neoprene drysuit need one who makes the best?

    Back in the day mid 90's I had the DUI which was considered excellent way back then
  10. gqllc007

    Why am I seeing Ads (Sponsor)?

    Thank you! I didn't know! I do have a question...If we leave ads running on the side does scubaboard get money from those or only when we click on them?
  11. gqllc007

    Why am I seeing Ads (Sponsor)?

    I went into preferences and checked off to block ads...I am still seeing them...so I logged off and logged back on and still can see the ads
  12. gqllc007

    B2 breathes "funny"

  13. gqllc007

    Why am I seeing Ads (Sponsor)?

    same here...ads all on the side
  14. gqllc007

    Weighting for Neutral Buoyancy

    I agree...The issue I had was isolated to the one DM giving me 16 pounds instead of 8 pounds. I didn't even realize the mistake till I was back on the boat and once I replayed in my head what occurred I realized what happened. The dive went fine without any issues....Otherwise I am ok with...
  15. gqllc007

    SDI Road to Rescue Diver

    My wife just finished SDI advanced and Nitrox. The instructors at Adirondack Scuba are excellent and plentiful. They did night dives, deep dives, navigation dives and each dive there were several instructors in the water. They worked on all aspects of diving for the students not just the minimum...
  16. gqllc007

    Weighting for Neutral Buoyancy

    All of it could have been jettisoned in equal amounts so I was covered just fine...my point was I can handle being weighted just right too being grossly overweighted...underweighted is the worst
  17. gqllc007

    Weighting for Neutral Buoyancy

    I also don't over think it...In Key Largo I used 16 pounds which was about 2 pounds heavy than needed to be...we were shallow around 30-40 feet....I just adjusted as needed. On the second dive I told the DM that I needed 8 pounds...I was wearing a SS BP/W so 4pounds in each pocket was 8 plus the...
  18. gqllc007

    Latent mask squeeze?

    Any chance you are on supplements or fish oil?
  19. gqllc007

    SOLD!!! SeaLife 3.0 with close up lens

    I am selling a basically new SeaLife 3.0 (msrp$599) with a brand new never used SeaLife close up lens (msrp$99). Camera has 4 dives on it. I will sell for $435 shipped insured conus paid via PayPal.
  20. gqllc007

    Some thoughts for assembling my first regulator set

    Look at the SP MK19/G260....I don't think you would go wrong with Mk17/19/G600/G260 or the Apeks...I use the ScubaPro in case I need support when traveling...SP seems to be everywhere
Top Bottom