Search results

  1. Kofferfisch

    Where should the pressure gauge be mounted and what are the advantages of this configuration?

    In fact, I dive sidemount with a longhose. So my question is not about myself. I find the question interesting and would like to know what the reasons are for the two options. In Germany, I rarely see anyone diving specifically with an H valve, but a redundant 1st stage is actually now standard...
  2. Kofferfisch

    Where should the pressure gauge be mounted and what are the advantages of this configuration?

    Thank you for your explanation. You show some things that I have not yet considered. Unfortunately, the longhose is "demonized" in my diving club. Basically, this can also be transferred to a configuration with short hose or am I missing something? I think to know what works best for you, it is...
  3. Kofferfisch

    Where should the pressure gauge be mounted and what are the advantages of this configuration?

    Hello together, last week there was a discussion in my diving club how the pressure gauge should be mounted for cold water diving. My instructor is of the opinion that it should be mounted on the primary first stage. Unfortunately, I do not see any advantage in this and when asked, they could...
  4. Kofferfisch

    Diving Computer North Edge Aqua

    Its written on the backside of the watch. You can see it on the pictures on ali express. Safety factors are agrassiv - medium - conservative
  5. Kofferfisch

    Diving Computer North Edge Aqua

    I have the watch. They claim that Buhmann ZH-L 16c is used. Unfortunately, I can not say which gradient factors are used because they can not be freely selected. I have dived the watch together with my perdix, but I can not say anything about it because I have only made one dive. The build...
  6. Kofferfisch

    Minor Hand Squeeze in Dry Suit/Gloves

    Thats also how I do it. I have the loop over my thump until I have pressed my hands through the cuff. Then I undo it.
  7. Kofferfisch

    Minor Hand Squeeze in Dry Suit/Gloves

    At the beginning I also used thin silicon tubing to equelise the pressure. Since a while I just use the thumb loop which works fine for me.
  8. Kofferfisch

    New Scubapro S-Tek (BP/W BC's) Line

    But hey it got a handle to throw it in the bin.
  9. Kofferfisch

    Question re: water in my mask

    I also have a full beard and actually have no problem with water running into my mask. Did you have your regulator in your mouth when you bought your mask? The face shape changes a bit and that can of course also be a reason why a mask is not 100% tight.
  10. Kofferfisch

    Transmitters on Short Hoses?

    I use this configuration exclusively for sidemount diving.The hose length is 15cm (~6 inch) which is what i think actually standard. If you want to dive backmount, the hose should of course be longer. Under the following link you will find the origin of the idea. Hose setup..need advice!
  11. Kofferfisch

    Transmitters on Short Hoses?

    I discovered this configuration a while ago on the board and have been diving this for a few dives and I am actually quite happy with it.
  12. Kofferfisch

    what's the current feeling on Miflex hoses - some years on from the recall, etc.

    The last Problem i had with one of my hoses. Maybe 100 dives in two years.
  13. Kofferfisch

    New Suunto Eon Steel Firmware Released

    I agree that the hardware is well-made and the display is easy to read, but I think you can expect that when you buy a device in this price segment. Nevertheless, on their homepage they advertise that new features will be added due to the update capability. If you look at the updates since the...
  14. Kofferfisch

    New Suunto Eon Steel Firmware Released

    I agree with you that the software on the Eon steel is very stable, but I just think that you can expect more in this price segment. Hmm I know the computers but in German forums is often reported about spontaneously going out dive computers and much too short battery life. Which is why I...
  15. Kofferfisch

    New Suunto Eon Steel Firmware Released

    For me, this TC was the last Suunto. Next time I will buy directly a Shearwater.... They care about their customers and are continuously expanding the product with new features. A mode for sidemount diving would have been something I would have been very happy about. But what I find even more...
  16. Kofferfisch

    New Suunto Eon Steel Firmware Released

    The first update in 3 years... From my point of view an absolute disappointment.
  17. Kofferfisch

    Teric and Perdix Cover

    I bought my protector directly from the manufacturer. There are also some for other dive computers. AMX-TEKnology perdix with protector by Kofferfisch posted Jan 7, 2021 at 6:53 AM
  18. perdix with protector

    perdix with protector

  19. Kofferfisch

    Best Dive Log App - Recommendations

    I use Diving Log and I am very satisfied with it. Diving Log 6.0 - scuba logbook software for diver - dive log, scuba log
  20. Kofferfisch

    EON Steel firmware update suggestions

    About a week ago I contacted suunto regarding an update of the eon steel. I got the answer that the computer is not yet EOl. But they could not give me more information about upcoming features.
Top Bottom