Search results

I haven't seen bismuth mentioned yet. Rotometals.com use to have pre-made bismuth soft weights, I believe they can still make them. Price was about 3x their lead counterparts, but its a one time cost, all of mine are over 4 years old and still look new...

hair ties

Because 20 people with no control of their lights makes for a poor experience for everyone and the guides cant signal eachother. After the first group of trails its usually ok to bring lighs.

The buttons won't work. Hit record on the way down and just leave it running. I've taken my stock housing to 300ft. I've also had the lens shatter at 170ft

I'm calling BS on the charge rate difference. 0.9a difference is not going to melt solder or overheat anything. If it was it would fail frequently from just the differences in charger outputs and inrush currents. Saltwater messed it up, no questions asked.

$400 for fins? WTF!

There is no limit. It would be the no different than running some lp149s overfilled

They would be the same weight. I wouldnt say it would be less than new, but would be similar in price. There's been some decent sales on the 12ah packs this fall .

Floating the idea of "rebuilding" the dewalt 9/12ah packs to 15ah for use in the BT and Cuda X. The main draw over the other 15ah/20ah batteries available now is that they would still use the factory dewalt housings and could pass TSA screenings for air travel with the red guard in place...

Drysuit is good Stay up front with the guide. Figure out how to make 1 trip down and back up with all your gear

Might be worth calling dive shops that would just fill to 2400 without the + mark anyway. Or find someone with a compressor Or just move to north FL where they'll fill them to 4k every time.

put it on backwards. Or mount the batteries outside the pockets more on your sides.

Buy the bx2 or universal flashlight holder and just use the base.

MK10. *I'm trying to buy more cheap mk2s, they've gotten expensive... Realistically a mk2 and mk10 are the same price these days.

hp120 or hp100 is what you want. The 133s are just heavy

Bump

So it makes a nice nightlight? Haha

Not at full brightness it doesn't...

The uk hangers with fans in them are amazing.

Lots of lights/etc use additional sealent around the glands and epoxy or similar where the wires come in. Its to prevent water from coming in if the outer sheathing is compromised.