Search results

Thanks for the reply, I'm using wetsuit. South East Asia and water is warm here. Edited my post with updated info.:thumb2:

I'm currently transitioning into side mount (using wetsuit, warm water here) and at the stage of sourcing equipment. Currently I run a recreational single AL80 back mount system with XTX200 (primary donate) setup. For the side mount BCD I'll be using the XDEEP Stealth 2.0 TEC (since I'll be...

I'm not particularly an expert with electronics but it crossed my mind about using a small relay with delay effect. So rather than using the Piezo to directly close the switch circuit, the piezo would be used to activate the relay, which in turn could be set to say 300-500ms to hold closed...

The newer variant appears to have the same crappy (eventually leaking) switches as previous, however the battery compartment looks like a huge improvement over the previous model. Looks like it might even have the cathode as part of the battery compartment too, meaning the outer case is not used...

Check my previous posts on here, I've been looking around for a "ready-to-go" magnetic switch but cannot find one. Almost like each manufacturer is using a custom design. The ones you link to here look like they might be magnetic, judging by the height of the switch and the price. They also have...

That's not the SUPE V6K you have there. It's one of the Chinese lights though I can't see exactly which from the photo. Also, the aluminium body of your light looks slightly different to the ones we normally see posted on here, though the switches look the same. For the switches I used a pair of...

Now that I have a working BB14-7s again I thought I would share my very non-scientific lumens test. I compared to a SUPE (scubalamp) V6K, assume to be version two. The spec sheet says that the V6k is 12,000 lumens on max power and 6,000 lumens on medium. It only has the two settings for the...

I previously used the Peregrine myself (it was my first dive computer) and switched to the Teric a few months ago for want of a compass amongst other features. Strangely you can fit more info onto the Teric screen due to the higher resolution, though I do miss the cool look of the larger...

Size comparison between the Garmin Descent G1 & Shearwater Teric. On a side note I will say that the Teric is hands down a way better dive computer if you only focus on the dive functionality. If however you just use your dive computer to monitor depth and NDL, then the G1 is fine. This isn't a...

Rather than start a new topic I thought I'd ask in here, since there are a few owners: Does the descent support adaptive safety stops like the Shearwaters do? That is, 3 mins by default but ups it to 5 mins if you go deeper than 30m or within a couple of minutes of NDL. My friend has a MK2s and...

Chiming in as I looked into this a lot: I went out of my way to buy a new old style shearwater transmitter recently. The new swift (with it's higher price tag) just didn't seem worth it to me. As I understand, the LED status indicator shows when it's transmitting, and not battery status, but...

Thanks for the extremely detailed review. Could you post side by side photos with the Apple watch for size comparison?

I just checked my dive log and it was 1hr 16 mins, of which I had the torch on for the majority of the time but on the lowest power setting. The switch was still lighting blue but I noticed towards the end of the dive if I switched the torch off and back on but leaving it on the highest power...

Wow, they are really only 4000 lumens?

Good find, however the circuit is 5v and that switch is 12v. Any bigger than 16mm and the switches would hit each other when they protrude through the inside of the housing, due to the angles they sit at. I can find plenty of magnetic switch contacts out there, fabricating the button that moves...

I found an issue (or two) with using the Piezo switches, or at least with the ones I have available. The pulse width on them only appears to be very short, almost not enough for the torch circuit to detect. I find I have to press mine really hard, sometimes several times for them to generate a...

Be sure to post some photos when you receive it, curious of the side by side size comparison with the Apple watch :)

Has anyone managed to remove the front glass? Mine flooded due to a sealing error made by myself. On visual inspection the board seems to be ok, also cleaned with alcohol, however when connecting the batteries I just get a dim glow straight away from the red and blue LEDs and the switches don't...

Can't comment on the Garmin but my shearwater's compass has been superb - no issues.

My 16mm switches arrived today, however, after ordering these 16mm ones based on the advice in this thread, when I've measured the internal diameter on the torch with my digital calipers, it's 17.2mm, meaning the switches don't fit (they are too small), which is annoying. I could probably grind...