Search results

so you would bail out and gas switch using QC's during entire deco? i.e. you will complete the entire dive on your BOV? must be a really good WOB on that BOV where can I get one? Shrimp/Divesoft definitely not up to that - I would gas switch to a regulator ASAP after going to the BOV. Matan.

Same here - except not extreme exposures. So in answer to OP: If one asks himself "should I risk my lungs over + 10 minutes of deco?" the answer is obvious to me. I'm not aware of any agency not recommending air breaks beyond a certain time on high PPO2. Matan.

doesn't matter. doesn't impact any gas switch/bottle rotation related actions (never did for me). Matan.

regardless of this post (which I will not comment on), can you please explain how you're using a V-weight on GUE CCR? Matan.

To OP: 1. You asked for a bailout deco regulator - means your have a rebreather. 2. Rebreathers are expensive. 3. Not looking into anyone's pocket - but: - If you can buy a rebreather - you shouldn't be saving on a regulator. - It's the equivalent to hearing a diver saying that helium is...

I haven't seen an al80 cylinder that's 5lbs positive when empty - which brand are these? Bands + manifold + another 1st stage add weight. Same weight as single al80? no - go ahead and do a weight check it saves you guessing weights and being unsure if you're properly weighted. Empty cylinders...

In some countries (Israel summer for example) - this can get even hotter. In some countries (Israel summer same example ^^) - the water will be ~84f. 8 hours being on a boat makes sense (ropes off 07:00 -> two dives -> back at 15:00). Takes me also 2h do drive home. No major scrubber issues...

Need a little clarification - are you using ambient filters on your video lights? I'm actually interested how these work at depth - since shallow obviously it's just ambient light (real ambient - from the Sun ^^). Matan.

Thank you for the reply. regarding AFS - I completely agree and I'm also changing to that - super frustrated from multiple videos ruined by LX10 AFC honestly regarding SS to 60 during 4K 30fps I understand - just not sure why let the camera determine ISO for you. Also I'm shooting CinelikeD...

great stuff - #1 is definitely the best. this was shot ambient light and just the Keldan filter? quick Q - I find that with my setup (similar to yours LX10 WWLC but I have x2 bigblue 10K) I'm having auto focus issues. are you shooting with AFC or AFS? also - why S priority and not full manual...

Never heard of Hollis neck seals. just get a silicone neck seal for your wife's suit - and this time get 2 (to have a spare one ready). eBay searched drysuit silicone neck seals Matan.

subsurface solves your quiz visually - enjoy :) your T1 instructor will definitely be more helpful than me, but: SOP is quite clear - plan your dives using Decoplanner - Than pragmatize (which as you know has a set of benefits when is comes to gas sharing scenarios / plan adjustments / etc.)...

If you've taken T1 - contact your instructor. If you haven't taken T1 - contact a GUE instructor to start working on becoming a T1 diver - you won't be disapointed. To answer to the topic at hand (based on my personal opinion): GUE SOP - all decompression should be planned based on...

What are the odds :) If anyone has one to sell - the header says it all. Matan.

I know they have it - the cost if that + shipping is more than twice compared to buying those parts on eBay. Matan.

I understand one can purchase the following parts: + + some surgical tubing - to be able to connect from inflator hose into divesoft analyzer. I'm just not sure which tubing to get? anyone knows the diameter of the divesoft input? Thank you, Matan.

in the unit after being dried post dive. Matan.

ideally - this is important to practice. reality - no one likes to spend helium and not everyone have access to a booster but must be practiced sometimes - crap will happen need to be ready. Matan.

Just repeat the check you did when first trying to balance your rig the first time. No magic math here - Need to test in the water. Thanks, Matan.

+1 always wet hands with latex/silicone seals drygloves - dry as a bone. OP - you already have SANTI smart seals - so the rings for smart gloves are available and by far the best (I've tried si-tech's solutions - SANTI is much better). bio seals - anyone can comment if worth spending money on...