Search results

I recommending decontaminating your wing atleast once a year or as needed. Fill with fresh water + steramine. Otherwise everyone's advice is spot on.

Yeah, that flat inner lip is designed. When you turn on the tank. If you are looking from the opposite direction. The air flows out and the pressure will start to slightly form the O-ring to seal any leaks between the valve and 1st stage. So usually, once it's pressurized it wont leak. Unless...

If the rubber sliding O-Ring is standard, cave adventurers/XDeep should make it right contact them. If you are using aluminum 80s, you need sliding D-Ring. If you don't want to, you need two sets of D-Rings on each side. You basically clip it off to one and move it to the other as your tank...

My gf dived the 15x + prestige combo for 2x years. No issues. Socal 50F degree salt water. I got her a deep6 excursion set during blackfriday for about 200 (1x) First and (1x) Second. She said it breathes way better, but she never had any issues with the mares. The hog has a 5th LP Port. It'll...

If your diving is being limited by NDL, you can try to get enrich air that is optimized for your dive vs the standard nitrox. But the difference will be minimal, you need to move up if you want to hit 45+ min bottom time at 100-130ft. You can do this without trimix if you don't have major...

I'm happy that's the case. I can see why you choose that LDS. Cheers mate!

I'm not disputing the fact that there is lack of training, money or various other issues. Tanks that fail inspection due to deserving it -- GREAT. I have major issues paying someone to fail a tank that should not be failed be it lack of ability, mistake, or what have you. If they don't have the...

The shop employee that is doing the inspection should of been given credentials by psi or some organization. They should be able to ask for a second opinion from them when there is an issue that is not clear and straighten it out fairly quickly

I would go bigger. I see your in Cali and understand if your shore diving why you may prefer 30 over 40. But if you mainly boat 40 all the way. And the 40 can become a deco bottle in the future

@Wathdoc Is the brightest set to? Is it default? If you set to highest, I don't have an issue to see it if its to bright out. On default and low, it isn't bright enough to show in the sun.

If the cam bands are tight enough where it won't slide. I assume, I won't be able to move the bands where I want to? I'll give it try

My problem is only to attach the bpw to a tank via cam bands. It's heavy and wants to slide down the tank... and there is nothing for me to hold it in place. So at the moment I have to undo the sta from the bpw and install it. Then install the bpw... I'm lazy and have differing circumference...

I have a SS Zen BP. I have the same issue... Adding a handle will be a lot easier then buying multiple STAs. Maybe I should add a handle too...

Honest question, Does the sternum strap get in the way of a suit inflator? How do you deal with that?

My gf and I dive quite a bit. Southern California, mostly shore diving. We usually have a long and steep hike to the dive site from the car. Waters is a bit rough usually. When diving multiple tanks with a long hike we usually have a foldable cart. Tanks, fins, and a box for regs and box of...

So True!

I heard there were spottings of a 7gill recently at crescent. But they don't look anything like a silky shark. They have a prehistoric face, spotted, they do get big and have a long ass tail. I know toupe sharks are found down in SD, they have a similar look to a silky shark. People say they...

A lot of people signed up for @rsingler regs servicing course. I'll let you know how it goes

Sorry to anyone that got scammed. I PMed and it was fishy. Insisted on paypal buyer protection and I'd pay the extra fees. They wouldnt agree to PayPal with buyer protection. Their English started to be a bit broken too. The A$$ banned me from SB. Luckily other mods unbanned me the next day. If...

Can you show me the sidemount harness that's $50? Is the Goodman handle adjustable, a make and model would be helpful.