Search results

I plan to use aquaseal + cotol. I'm going to glue the new glove to the old glove liner inside the cuffs. We'll see how it works.

Thank you

I get tired to patch my old DUI dry gloves with aquaseal and want to buy a new rubber/pvc gloves, cut the old gloves and glue the new ones to existing ZipSeals cuffs. Any suggestion where I can find gloves which are similar to DUI orange dry gloves? My local Home Depot sells blue PVC gloves...

Even when I dive deep (~200') with my OC buddies is much louder underwater comparing diving in CCR only group :poke:

I use exactly the same amount of lead for my Prism2 CCR and DIR OC setup with steel HP100. But every rebreather is different.

OBOE board drives the monitor side (HUD, Nerd2 or additional Petrel2). SOLO board drives the controller side. Which one loses the cell reading: Petrel, HUD or both? PS: Be very gentle with board connectors. It's very easy to broke wires there. Ask me how I know :(

I put ankle weights around the tank valve not hoses. I didn't have time during the class to find what was the main contribution to the wrong trim. Maybe it were not hoses but something else. Anyway moving some weights higher solved the issue.

I taught a refresher class last winter and one student came with a double house reg. Don't remember the brand but it was a modern one. I spent some time to fix his trim. His upper body was way positive probably because of hoses full of air. Finally put 2 or 4 lbs ankle weights around the tank...

Petrel Firmware v53... Time to upgrade to v65 :-)

I was wrong :( I pulled the sensor out and the screen shows .00

Call Shearwater. They are more knowledgeable than Hollis support.

Voted out != Fail. Petrel still shows PO2 for all cells even there are way off. Fail = no signal.

I've been there. In my case it was a bad wire harness. I would double check it with a multimeter before checking anything else.

Marissa has Yukon scheduled on June 22 morning.

I was wrong about dates. I'll be in San Diego June 20-23 and plan to dive on Saturday June 22. Missile Tower and Murray head sound very interesting.

Hello, I plan to visit San Diego in June 19-21. My family is going to Legoland and I'm open for diving on June 20. I plan to bring my rebreather. Any recommendations for dive sites and/or dive boats? I'm a full trimix certified and dive weekly in Monterey/Carmel area in 130-220' depth range. I...

There are multiple options with boat/kayak/dpv. Without it it's a decent swim everywhere but North Monastery where you can reach 60' and much deeper easily.

Most likely it just gets overheated. It's a dive light and supposed to be underwater

Dive P2 for 2.5 years. The major issue was a crack in the O2 manual add valve which was replaced with the new steel version. Have to admit that Hollis rebreather support is not the fastest one but it works and in general I have no regrets on my choice. Tried a couple others units during TDI...

It seems like possible to order just these o-ring from the Hollis. Expecting my order from the dealer. Thanks anyone for advices.