Coverting an Scubapro MK17 to DIN?

[hedonist222]

Wow 30 nm
Thats a little beyond snug


Thank you, Zung.

 

[rsingler]

But im not sure how to attach hex key to torque wrench

See my edited post above. Sorry! It's not a hex key fitting, for the Mk17. You need a thin wall 1" socket (www.scubatools.com).

 

[hedonist222]

Noted.
Thank you all very much for the assistance.

Hugs

 

[rsingler]

Aw, nuts. I completely forgot the title of the thread. You're converting to DIN. So you may still need a hex key as pictured above. If I recall, the older Mk10 DIN fittings were 7/32". I don't know what the Mk17 DIN requires. Let me check the manual. Stand by...

 

[rsingler]

It's a 6mm hex key with a socket for the torque wrench. Here's the Service Manual.

 

[rhwestfall]

And here is the socket:

 

[rhwestfall]

You can also get a long version with a little more reach...

 

[hedonist222]

thanks guys

anyone have the mk25 evo manual handy?

 

[Zung]

thanks guys

anyone have the mk25 evo manual handy?

Right here on SB.

 

[rhwestfall]

@Zung!!!!!! Long time!