Upgrade from Scubapro G250?
- Thread starter SlyStrat
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
If you upgrade, send me your G250.
Just kidding, an upgraded G250 is considered by many to be one of the best second stages out there. Its worth checking if yours has the newer S-wing poppet. If you have any questions about them, @buddhasummer is the god (or at least minor deity) of G250s.
Just kidding, an upgraded G250 is considered by many to be one of the best second stages out there. Its worth checking if yours has the newer S-wing poppet. If you have any questions about them, @buddhasummer is the god (or at least minor deity) of G250s.
jakehbk
Contributor
With the exception of that chungus console, there is nothing wrong with that setup. Have it tested and serviced if it needs it.
MK10 + G250. You have the best ever built!
Just service them properly. Any change would mean going worst.
I would suggest that you pack your MK10 with silicon grease and install the rubber SPEC boot for avoiding loosing it around.
A properly serviced and silicon-packed first stage can be maintenance-free for 5 years!
Just service them properly. Any change would mean going worst.
I would suggest that you pack your MK10 with silicon grease and install the rubber SPEC boot for avoiding loosing it around.
A properly serviced and silicon-packed first stage can be maintenance-free for 5 years!
Rusty Shackleford
Contributor
Replace the Dacor 1st with something you can service.
Mk-10/G250:
A very good regulator to keep going.
I do have a somewhat different view on packing that ambient chamber.
I've seen too many cases of damage from incomplete packing jobs to think it is a good idea.
30 years of Great Lakes cold water diving, and that regulator works fine without packing...
YMMV
A very good regulator to keep going.
I do have a somewhat different view on packing that ambient chamber.
I've seen too many cases of damage from incomplete packing jobs to think it is a good idea.
30 years of Great Lakes cold water diving, and that regulator works fine without packing...
YMMV
Similar threads
