Org 6171.10 Panasonic LX100 housing fit the Lx100ii?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

saridnour

Registered
Messages
46
Reaction score
13
Location
Seattle, WA
# of dives
200 - 499
Will the original 6171.10 Panasonic LX100 housing fit the newer Lx100ii?
I know the lx100 ii is 9mm or so deeper but cant find any details on of the depth between the 6171.10 and the 6171.11.
Will a v2 fit in the old housing that I already own?

-saridnour
 
Crickets from Ikelite.. BUT I did get to try a Panasonic LX100 II in my org 6171.10 case. IT WORKS!
Its a bit tight getting it on the tray due to the thickness but I did not have to force it. There was plenty of room everywhere else. Flash TTL did detect and work without issue with a single DS161 on a dual cable. Buttons made contact as expected and maybe a bit better contact on the jog wheel (thicker?).
Disclaimer: This was tested on the bench and not in water. Why a single strobe. Will get it wet when DR OK's my return to the water. :)
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom