Kraken Exploded Views and Parts List

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

True... I will remove it from that early Kraken model.
I've now made all the corrections to the current production model, just a couple of tweaks to go.

FYI dug up a Conshelf 21 and measured the threaded shaft and o-ring groove etc (which I then used as a basis for the early Kraken model).
Groove dia is 16.4mm x 1.15 wide
OEM Inverted External Retaining Ring ID 17.57mm OD 21.2mm x 1.07mm thick.​
Closest I could find in a quick check was Metric 17mm OD designed to fit a groove 16.2mm but not in 316 Stainless.
McMaster-Carr
 
OK the Kraken Exploded View and Parts List HP Side REV 2 is ready.
Corrected the yoke and collar nut... even added HP engraving :coffee:
Corrected the main body threaded shaft to match current production (early fully threaded version still under development)
Added the -023 o-ring under the yoke
Simplified HP and LP port layout with one example of each
However, my original post is now locked for editing!
If one of the mods could please delete the original PDF and replace it with the one below that will help a lot :thumb:
 

Attachments

  • Kraken Exploded View BOM HP SIDE REV 2.PDF
    87 KB · Views: 186

Back
Top Bottom